CREE SEC-EDG Edge Series Wall Pack Security Light Fixture
PART# SEC-EDG
Web Price
Please call 1-800-983-1315 for the lowest available price- Lumen:101 LPW - Up to 13,137 Lumens (Please see spec sheet)lm
-
Certifications | ANSI, CUL Listed, Dark Sky Compliant, DLC Approved, FCC Compliant, IP65 / IP66 / IP67, Made in America, UL Listed |
---|---|
Color Temp | 5700K |
Dimmable | No |
CRI | 70 |
Dimensions | Length varies based on selection |
Length | Varies based on selection (Please see spec sheet) |
Width | 18.30" |
Height | 4.10" |
Lumen Output: | 101 LPW - Up to 13,137 Lumens (Please see spec sheet) |
Manufacturer | CREE |
Product Warranty | 10 Year |
Part Number | SEC-EDG Full Series |
Technology | LED - New Fixture |
Voltage | Multivolt 120V-277V |
ShineRetrofits Input:
CREE's Security Edge series wall pack fixtures deliver exceptional efficiency and durability made with rugged die-cast aluminum and weathertight LED driver compartments. Featuring a slim, low-profile design and aluminum housing, the SEC-EDG series includes a lightweight mounting box for installation and can be used as an uplight or downlight. Please check the spec sheet for more details and customize the fixture with the options above to best fit your security lighting needs.
Construction & Materials:
• Slim, low-profile design
• Luminaire sides are rugged die-cast aluminum with integral, weathertight LED driver compartment and high-performance aluminum heat sinks specifically designed for LED applications
• Housing is rugged aluminum
• Furnished with low copper, lightweight mounting box designed for installation over standard and mud ring single gang J-Boxes
• Luminaire can also be directly mounted to a wall and surface wired
• Secures to a wall with four 3/16" (5mm) screws (by others)
• Conduit entry from top, bottom, sides, and rear
• Allows mounting for uplight or downlight
• Designed and approved for easy through-wiring
• Includes leaf/debris guard
• Exclusive Colorfast DeltaGuard® finish features an E-Coat epoxy primer with an ultradurable powder topcoat, providing excellent resistance to corrosion, ultraviolet
degradation, and abrasion. Black, bronze, silver, and white are available
• Weight: See Dimensions and Weight Chart on page 1
Electrical System:
• Input Voltage: 120–277V or 347–480V, 50/60Hz, Class 1 drivers
• Power Factor: > 0.9 at full load
• Total Harmonic Distortion: < 20% at full load
• Integral weathertight J-Box with leads (wire nuts) for easy power hook up
• Integral 10kV surge suppression protection standard
• To address inrush current, a slow blow fuse or type C/D breaker should be used
• Maximum 10V Source Current: 20 LED (350mA): 10mA; 20LED (525 & 700 mA) and 40-120 LED: 0.15mA
Regulatory & Voluntary Qualifications:
• cULus Listed
• Suitable for wet locations
• Meets FCC Part 15 standards for conducted and radiated emissions
• Enclosure rated IP66 per IEC 60529 when ordered without P, PML or ML options
• 10kV surge suppression protection tested in accordance with IEEE/ANSI C62.41.2
• Luminaire and finish endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 117
• DLC qualified. Exceptions apply when ordered with full backlight control. Please refer to www.designlights.org/QPL for the most current information
• Dark Sky Friendly, IDA Approved. Please refer to www.darksky.org/ for the most current information
• Meets Buy American requirements within ARRA
ShineRetrofits Input:
CREE's Security Edge series wall pack fixtures deliver exceptional efficiency and durability made with rugged die-cast aluminum and weathertight LED driver compartments. Featuring a slim, low-profile design and aluminum housing, the SEC-EDG series includes a lightweight mounting box for installation and can be used as an uplight or downlight. Please check the spec sheet for more details and customize the fixture with the options above to best fit your security lighting needs.
Construction & Materials:
• Slim, low-profile design
• Luminaire sides are rugged die-cast aluminum with integral, weathertight LED driver compartment and high-performance aluminum heat sinks specifically designed for LED applications
• Housing is rugged aluminum
• Furnished with low copper, lightweight mounting box designed for installation over standard and mud ring single gang J-Boxes
• Luminaire can also be directly mounted to a wall and surface wired
• Secures to a wall with four 3/16" (5mm) screws (by others)
• Conduit entry from top, bottom, sides, and rear
• Allows mounting for uplight or downlight
• Designed and approved for easy through-wiring
• Includes leaf/debris guard
• Exclusive Colorfast DeltaGuard® finish features an E-Coat epoxy primer with an ultradurable powder topcoat, providing excellent resistance to corrosion, ultraviolet
degradation, and abrasion. Black, bronze, silver, and white are available
• Weight: See Dimensions and Weight Chart on page 1
Electrical System:
• Input Voltage: 120–277V or 347–480V, 50/60Hz, Class 1 drivers
• Power Factor: > 0.9 at full load
• Total Harmonic Distortion: < 20% at full load
• Integral weathertight J-Box with leads (wire nuts) for easy power hook up
• Integral 10kV surge suppression protection standard
• To address inrush current, a slow blow fuse or type C/D breaker should be used
• Maximum 10V Source Current: 20 LED (350mA): 10mA; 20LED (525 & 700 mA) and 40-120 LED: 0.15mA
Regulatory & Voluntary Qualifications:
• cULus Listed
• Suitable for wet locations
• Meets FCC Part 15 standards for conducted and radiated emissions
• Enclosure rated IP66 per IEC 60529 when ordered without P, PML or ML options
• 10kV surge suppression protection tested in accordance with IEEE/ANSI C62.41.2
• Luminaire and finish endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 117
• DLC qualified. Exceptions apply when ordered with full backlight control. Please refer to www.designlights.org/QPL for the most current information
• Dark Sky Friendly, IDA Approved. Please refer to www.darksky.org/ for the most current information
• Meets Buy American requirements within ARRA