RAB Lighting T8-43-96G-FA8 43 Watt 8 Ft Ballast Bypass Double-Ended Single Pin Linear Tube Lamp 59W and 54W Equivalent
PART# T8-43-96G-FA8-830-DE-BYP
Web Price
Please call 1-800-983-1315 for the lowest available price- Lumen:5,000 - 5,500lm
- Wattage:43 Watt
-
Type of Area | Apartment Buildings, Home & Architectural, Office & Small Retail |
---|---|
Certifications | CUL Listed, DLC Approved, FCC Compliant, NSF, ROHS, UL Listed |
Dimmable | No |
Lamp Life: | 50,000 Hours |
CRI | 82 CRI |
Dimensions | 93.91" (MOL) x 1.09" (MOD) |
Length | 93.91" |
Width | 1.09" |
Lumen Output: | 5,000 - 5,500 |
Manufacturer | RAB Lighting |
Product Warranty | 5 Year |
Part Number | T8-43-96G-FA8-830-DE-BYP |
Minimum Start Temperature | -4 Deg F |
Technology | LED |
Wattage | 43 Watt |
Weight Each | 1.3 lbs |
Total Harmonic Distortion [THD] | <20% |
Power Factor | 0.9 |
Fixture Length | 8 Feet / 96 Inches |
Base Type | FA8 Pin |
Bulb Type | T8 |
Case Quantity | 10 |
ShineRetrofits Input:
This 43-watt, 8-foot ballast bypass double-ended linear tube lamp is designed to replace conventional fluorescent T8 and T12 tubes. It offers easy installation by bypassing the ballast and wiring directly to line voltage, ensuring energy savings and reduced costs. This mercury-free lamp provides instant, flicker-free brightness with a long-lasting diffusion coating to maintain light quality over time. Suitable for enclosed and open fixtures, it works seamlessly with shunted and non-shunted sockets.
Features:
• FLUORESCENT REPLACEMENT - Replace conventional fluorescent T8 and T12 linear tubes
• EASY TO INSTALL - Cut the ballast out, and rewire sockets directly to line voltage
• SAVE ENERGY AND MONEY - Provides the same output as fluorescent but uses far less energy
• SAVE ENERGY AND MONEY - Provides the same output as fluorescent but uses far less energy
• ENCLOSED FIXTURE RATED - May be used in enclosed and open fixtures
• DIFFUSION COATING - Will maintain the same light quality over time and won't yellow, shrink, or wrinkle
• BALLAST BYPASS - Internal driver eliminates the need for external ballasts or drivers
• INSTANT ON - No warmup time required, full brightness instantly
• LOW FLICKER - Less than 5% flicker
• MERCURY FREE - Environmentally friendly vs fluorescent technologies
• SHUNTED AND NON-SHUNTED - Works on shunted and nonshunted sockets
ShineRetrofits Input:
This 43-watt, 8-foot ballast bypass double-ended linear tube lamp is designed to replace conventional fluorescent T8 and T12 tubes. It offers easy installation by bypassing the ballast and wiring directly to line voltage, ensuring energy savings and reduced costs. This mercury-free lamp provides instant, flicker-free brightness with a long-lasting diffusion coating to maintain light quality over time. Suitable for enclosed and open fixtures, it works seamlessly with shunted and non-shunted sockets.
Features:
• FLUORESCENT REPLACEMENT - Replace conventional fluorescent T8 and T12 linear tubes
• EASY TO INSTALL - Cut the ballast out, and rewire sockets directly to line voltage
• SAVE ENERGY AND MONEY - Provides the same output as fluorescent but uses far less energy
• SAVE ENERGY AND MONEY - Provides the same output as fluorescent but uses far less energy
• ENCLOSED FIXTURE RATED - May be used in enclosed and open fixtures
• DIFFUSION COATING - Will maintain the same light quality over time and won't yellow, shrink, or wrinkle
• BALLAST BYPASS - Internal driver eliminates the need for external ballasts or drivers
• INSTANT ON - No warmup time required, full brightness instantly
• LOW FLICKER - Less than 5% flicker
• MERCURY FREE - Environmentally friendly vs fluorescent technologies
• SHUNTED AND NON-SHUNTED - Works on shunted and nonshunted sockets