Due to global supply chain issues, stock levels can change. Please contact support to verify stock levels. Call 1-800-983-1315

CREE CAN-228 LED Recessed Canopy Light Fixture (Product Configurator)

PART# CAN-228

$734.28
Please call 1-800-983-1315 for the lowest available price
  • cree
Available in increments of 1
Ordering more than 10? Request a quote and we’ll back to you with our lowest price.
More Information
Type of Area Gas Station & Convenience Store, Large Retail & Open Areas, Office & Small Retail
Ballast Factor 1.00
Certifications CUL Listed, DLC Approved, FCC Compliant, Made in America, UL Listed
Dimmable No
CRI 70
Manufacturer CREE
Product Warranty 10 Year
Part Number CAN-228
Technology LED
Voltage Multivolt 120V-277V

ShineRetrofits Input: 
CREE's 228 Series LED Recessed Canopy Fixture features a slim, low profile design and mounts easily from below or above the deck.  The housing is durable aluminum the deck is secure with a compression molded trim frame.  Designed for canopies 16-22 gauge in petroleum stations, convenience stores, drive-thru banks and restaurants, retail and grocery stores.  Select from a variety of options available in the drop down menu's.  

DLC qualified when ordered with PS or SL optics with 60 LEDs and 525 or 700mA drive current. Please refer to www.designlights.org/QPL for most current information

Construction & Materials:
• Slim, low profile, easy mounting from below or above the deck
• Luminaire sides are rugged cast aluminum with high performance extruded aluminum heat sink specifically designed for LED
• Luminaire mounts directly to the canopy deck and is secured in place with compression molded trim frame
• Luminaire is provided with factory applied foam gasket and provides for a weathertight seal between luminaire housing and canopy deck
• Suitable for single or double skin canopies with 12" (305mm) or 16" (406mm) wide panels. Designed for canopies of 16-22 gauge (maximum 0.065" [1.65mm] thickness)
• Weathertight driver compartment is constructed of anodized extruded aluminum for exceptional corrosion resistance and thermal performance
• Integral weathertight junction box with 4.5" (114mm) IP threaded connection points. Rated for feed through 8 (4 in, 4 out) #12 AWG conductors
• Below ceiling serviceable driver tray for ease of upgrade or replacement
• Field adjustable drive current. Can't exceed drive current specified in part number. Exception is 90 LEDs at 350mA which can be adjusted to 525mA
• Exclusive Colorfast DeltaGuard® finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. Black, bronze, silver, and white are available 
• Weight: See Dimensions and Weight chart on page 1

Electrical System:
• Input Voltage: 120-277V or 347-480V, 50/60Hz, Class 1 drivers
• Power Factor : > 0.9 at full load
• Total Harmonic Distortion: < 20% at full load
• Maximum 10V Source Current: 30-60 LED: 0.15mA; 90 LED: 0.30mA
• Integral 10kV surge suppression protection standard
• To address inrush current, slow blow fuse or type C/D breaker should be used

Regulatory & Voluntary Qualifications:
• cULus Listed
• Suitable for wet locations
• Meets FCC Part 15 Class A standards for conducted and radiated emissions
• 10kV surge suppression protection tested in accordance with IEEE/ANSI C62.41.2
• Luminaire and finish endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 117
• Meets Buy American requirements within ARRA
• DLC qualified when ordered with PS or SL optics with 60 LEDs and 525 or 700mA drive current. Please refer to www.designlights.org/QPL for most current information

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
  • 10 Year Warranty
  • DLC Approved
  • Made In America Compliant
  • UL Listed
© 2022 ShineRetrofits.com. All Rights Reserved. Your source for induction lights, LED, and fluorescent fixtures and retrofit kits.