Mule Lighting MF40-LP1300 Low Profile Emergency Ballast for T5/T8 Lamps
PART# MF40-LP1300
$127.85
Web Price
Please call 1-800-983-1315 for the lowest available price- Lumen:1300lm
Certifications | NEC, NFPA, UL Listed |
---|---|
Dimmable | No |
Dimensions | 14.25" x 2.1" x 1.2" |
Length | 14.25" |
Width | 2.10" |
Height | 1.20" |
Lumen Output: | 1300 |
Manufacturer | Mule Lighting |
Part Number | MF40-LP1300 |
Technology | Emergency Ballast |
Voltage | Multivolt 120V-277V |
Weight Each | 3.00 lbs |
Bulbs Included? | No |
Low profile for t5 or t8 flourescent lamps. Embassy fluorescent ballasts emergency ballasts allow the same fixture to be used for both normal and emergency operation. In the event of a power failure, the emergency ballast switches to emergency mode and operates one or two of the existing lamps for a minimum of 90 minutes. Each emergency ballast contains a battery, charger and inverter circuit in a single package. The emergency ballast can be mounted in the fixture wireway or on top of the fixture, and is UL listed for factory installation or retrofit applications.
Benefits & Features
- Compatible with electronic (including those containing end-of-life shutdown circuits), standard magnetic, energy saving and dimming AC ballasts
- Compatible with most standard and HO T5 miniature bi-pin, T8 bi-pin and rapid-start (4-pin) long compact lamps
- Easy ballast and channel installation
- Install inside, on top or remotely from fixture
- Operates one lamp
- Can be used with switched or un-switched lighting fixtures
- Compact battery case
- Reliable, high-frequency inverter
- Premium sealed nickel-cadmium battery
- 120/277 VAC operation
- Test switch and LED charge indicator light supplied standard
- Low power consumption
- End-of-lamp-life compatible
- Temperature Range Standard: 0°C - 50°C (32°F - 122°F)
Low profile for t5 or t8 flourescent lamps. Embassy fluorescent ballasts emergency ballasts allow the same fixture to be used for both normal and emergency operation. In the event of a power failure, the emergency ballast switches to emergency mode and operates one or two of the existing lamps for a minimum of 90 minutes. Each emergency ballast contains a battery, charger and inverter circuit in a single package. The emergency ballast can be mounted in the fixture wireway or on top of the fixture, and is UL listed for factory installation or retrofit applications.
Benefits & Features
- Compatible with electronic (including those containing end-of-life shutdown circuits), standard magnetic, energy saving and dimming AC ballasts
- Compatible with most standard and HO T5 miniature bi-pin, T8 bi-pin and rapid-start (4-pin) long compact lamps
- Easy ballast and channel installation
- Install inside, on top or remotely from fixture
- Operates one lamp
- Can be used with switched or un-switched lighting fixtures
- Compact battery case
- Reliable, high-frequency inverter
- Premium sealed nickel-cadmium battery
- 120/277 VAC operation
- Test switch and LED charge indicator light supplied standard
- Low power consumption
- End-of-lamp-life compatible
- Temperature Range Standard: 0°C - 50°C (32°F - 122°F)
Write Your Own Review