Maxlite MLFPFK2X2-215 LED Flat Panel Flange Mounting Kit for 2x2 Fixtures 99969
Web Price Please call 1-800-983-1315 for the lowest available price
The Flat Panel Flange Mounting Kit is designed for recess installation in drywall ceiling applications. This kit is meant for 2'x2' recessed troffers -- including the Direct Lit Performance LEDs, MaxLED ECO-T, FlatMax LEDs and Recessed Architectural Fixtures.
• MaxLED® ECO-T™: 2’x2’
• Direct Lit Performance LED Flat Panels: 2’x2’
• FlatMax™ LED Flat Panels: 2’x2’
• Recessed Architectural Fixtures: 2’x2’
• Designed to permit use of grid (NEMA G) fixtures in ceilings requiring flanges
• Designed to be used with any grid (NEMA G) troffer
• Suitable for individual and continuous row applications
• Side and end rails are extruded aluminum and finished in a baked white polyester coating
• Corner clips are zinc-plated steel and slide into slots provided in side and end rails
• Slide (snap-lock) the corner angles into side and end/intermediate rails as shown above.
• Place the assembled frame into the ceiling opening and wire support (at four corners as shown) from main floor/ceiling structure.
• For continuous row installation, order the appropriate number of MLFPFK kits. No extension kits are required.
• The ceiling opening required is nominal width and length plus 1/4". Example: 24-1/4" x 48-1/4" for an MLFPFK2x4
• The continuous row opening required is the sum of the nominal sizes plus 1/4". Example: a row of 2'x12' (three MLFP24s) requires a ceiling opening of 24-1/4" x 144-1/4" (2'-1/4" x 12'-1/4").
|Type of Area||Hangers & Storage, Home & Architectural, Large Retail & Open Areas, Office & Small Retail|
|Weight Each||5 lbs.|