Maxlite MLFPFK1X4-215 LED Flat Panel Flange Mounting Kit for 1x4 Fixtures 99968 [Min Qty: 5]

ShineRetrofits Input

The Flat Panel Flange Mounting Kit is designed for recess installation in drywall ceiling applications.  This kit is meant for 1'x4' recessed troffers -- including the Direct Lit Performance LEDs, FlatMax LEDs and Recessed Architectural Fixtures.

Fits:

• Direct Lit Performance LED Flat Panels: 1’x4’
• FlatMax™ LED Flat Panels: 1’x4’
• Recessed Architectural Fixtures: 1’x4’

Application:

• Designed to permit use of grid (NEMA G) fixtures in ceilings requiring flanges
• Designed to be used with any grid (NEMA G) troffer
• Suitable for individual and continuous row applications

Construction/Finish:
• Side and end rails are extruded aluminum and finished in a baked white polyester coating
• Corner clips are zinc-plated steel and slide into slots provided in side and end rails

Installation:

• Slide (snap-lock) the corner angles into side and end/intermediate rails as shown above.
• Place the assembled frame into the ceiling opening and wire support (at four corners as shown) from main floor/ceiling structure.
• For continuous row installation, order the appropriate number of MLFPFK kits. No extension kits are required.
• The ceiling opening required is nominal width and length plus 1/4". Example: 24-1/4" x 48-1/4" for an MLFPFK2x4
• The continuous row opening required is the sum of the nominal sizes plus 1/4". Example: a row of 2'x12' (three MLFP24s) requires a ceiling opening of 24-1/4" x 144-1/4" (2'-1/4" x 12'-1/4").