LSI Industries CRUSK UNV SC LED SS 50 UE WHT 98 Watt Legacy Superkit Retrofit LED High Intensity Canopy Light Fixture
- Lumen:13,674lm
- Wattage:100 Watt
-
About Product
*Please make sure to check the spec sheet for additional finish choices available for order. For more information, please give us a call.
ShineRetrofits Input:
The Legacy Canopy LED Light Fixture is made for easy installation and will give you years of high performance, low cost lighting. It features a very slim profile, ensuring that it will not detract from merchandise or advertising, plus it offers excellent light distribution. Built for durability and performance, it's rated for a minimum of 60,000 hours of life, certified Made in the USA, UL listed, RoHS compliant, and IP67 rated.
Features:
Crossover SuperKits allow you replace many existing 2x2 canopy fixtures (including LSI, Whiteway and Jet-Phillips) without having to know the dimensions of the existing fixture.
HOUSING - Low profile, durable die-cast, aluminum construction, providing a reliable weather-tight seal.
LEDS - Features an array of select, mid-power, high brightness, high efficiency LED chips; 5300°K color temperature, 70 CRI (nominal).
DRIVE CURRENT - Choice of Low Wattage (LW) or Super Saver (SS).
OPTICS / DISTRIBUTION - Symmetrical, which directs light through a glass lens to provide a uniform distribution of light to vertical and horizontal surfaces.
OPTICAL UNIT - Features an ultra-slim 7/8” profile die cast housing, with a standard flat glass lens. Unit is water-resistant, sealed to an IP67 rating. Integral designed heat sink does not trap dirt and grime, ensuring cool running performance over the life of the fixture.
PRESSURE STABILIZING VENT - Luminaire assembly incorporates a pressure stabilizing vent breather to prevent seal fatigue and failure.
DRIVER- State-of-the-art driver technology superior energy-efficiency and optimum light output. Driver components are fully encased in potting for moisture resistance.
Complies with IEC and FCC standards.
ADAPTOR PANEL - Die formed galvanized steel, with powder coat finish.
OPERATING TEMPERATURE - -40°C to 50°C (-40°F to +122°F)
ELECTRICAL - Universal voltage power supply, 120-277 VAC, 50/60 HZ input. Drivers feature two-stage surge protection (including separate surge protection built into
electronic driver) meets IEEE C62.41.2-2002, Scenario 1, Location Category C.
FINISH - Standard color is white and is finished with LSI’s DuraGrip polyester powder coat process. DuraGrip withstands extreme weather changes without cracking or peeling.
INSTALLATION - Pre-assembled optical unit and mounting panel hinges and fastens to existing fixture housing in place of current door assembly. Driver is pre-mounted to back of CRUSK assembly.
SHIPPING WEIGHT - 27 pounds.
EXPECTED LIFE - Minimum 60,000 to 100,000 hours depending upon the ambient temperature of the installation location. See LSI web site for specific guidance.
WARRANTY - Limited 5-year warranty.
LISTING - UL listed to UL 1598, UL 8750 and other U.S. and International safety standards. Suitable for wet locations.
PHOTOMETRICS - Applications layouts are available upon request.
HID Equivalent | 320 Watt HID, 400 Watt HID |
---|---|
Mounting Height | 23 - 28 Feet |
Type of Area | Gas Station & Convenience Store |
Ballast Factor | 1.00 |
Certifications | CE, Dark Sky Compliant, DLC Approved, ETL Listed, IP65 / IP66 / IP67, Made in America, ROHS, UL Listed |
Color Temp | 5000K |
Dimmable | No |
Lamp Life: | 60,000-100,000 Hours |
CRI | 70 |
Dimensions | 19.75" x 19.375" x 0.875" |
Length | 19.75" |
Width | 19.375" |
Height | 0.875" |
Lumen Output: | 13,674 |
Manufacturer | LSI Lighting |
Product Warranty | 5 Year |
Part Number | CRUSK UNV SC LED SS 50 UE WHT |
Minimum Start Temperature | -40 Deg F |
Technology | LED - New Fixture |
Voltage | Multivolt 120V-277V |
Wattage | 100 Watt |
Weight Each | 27.00 lbs |