LSI Industries CRUS SM SC LED SS CW UE WHT 114W 114 Watt Legacy Surface Mount LED High Intensity Canopy Light Fixture

PART#
CRUS SM SC LED SS CW UE WHT
Web Price Please call 1-800-983-1315 for the lowest available price
$459.99
Spec Sheet
There is no Specsheet Available
  • Lumen:
    13,554lm
  • lsi
Available in increments of 1
Ordering more than 10? Request a quote and we’ll back to you with our lowest price.
Shine Recommended
Color Temperature:
5000K

*Please make sure to check the spec sheet for additional finish choices available for order. For more information, please give us a call.

ShineRetrofits Input:

The Legacy Canopy LED Surface Mount Light Fixture is made for easy installation and will give you years of high performance, low cost lighting. It features a very slim profile, ensuring that it will not detract from merchandise or advertising, plus it offers excellent light distribution. Built for durability and performance, it's rated for a minimum of 60,000 hours of life, certified Made in the USA, UL listed, RoHS compliant, and IP67 rated.

Features:

HOUSING - One-piece, die-formed, aluminumm housing with powder coated finish. One conduit knockout and four mounting holes.

LEDS - Features an array of select, mid-power, high brightness, high efficiency LED chips; 5300°K color temperature, 70 CRI (nominal).

DRIVE CURRENT - Choice of Low Wattage (LW) and Super Saver (SS).

OPTICS / DISTRIBUTION - Symmetrical, which directs light through a glass lens to provide a uniform distribution of light to vertical and horizontal surfaces.

OPTICAL UNIT - Features an ultra-slim 7/8” profile die cast housing, with a standard flat glass lens. Unit is water-resistant, sealed to an IP67 rating. Integral designed heat sink does not trap dirt and grime, ensuring cool running performance over the life of the fixture.

PRESSURE STABILIZING VENT - Luminaire assembly incorporates a pressure stabilizing vent breather to prevent seal fatigue and failure.

DRIVER- State-of-the-art driver technology superior energy-efficiency and optimum light output. Driver components are fully encased in potting for moisture resistance.
Complies with IEC and FCC standards.

ADAPTOR PANEL - Die formed galvanized steel, with powder coat finish.

OPERATING TEMPERATURE - -40°C to 50°C (-40°F to +122°F)

ELECTRICAL - Universal voltage power supply, 120-277 VAC, 50/60 HZ input. Drivers feature two-stage surge protection (including separate surge protection built into
electronic driver) meets IEEE C62.41.2-2002, Scenario 1, Location Category C.

FINISH - Standard color is white and is finished with LSI’s DuraGrip polyester powder coat process. DuraGrip withstands extreme weather changes without cracking or peeling.

INSTALLATION - Pre-assembled optical unit and mounting panel attaches to fixture
housing via 4 fasteners. Driver is pre-mounted to back of optical assembly.

SHIPPING WEIGHT - 35 pounds.

EXPECTED LIFE - Minimum 60,000 to 100,000 hours depending upon the ambient temperature of the installation location. See LSI web site for specific guidance.

WARRANTY - Limited 5-year warranty.

LISTING - UL listed to UL 1598, UL 8750 and other U.S. and International safety standards. Suitable for wet locations.

PHOTOMETRICS - Applications layouts are available upon request.

More Information
HID Equivalent320 Watt HID, 400 Watt HID
Mounting Height23 - 28 Feet
Type of AreaGas Station & Convenience Store
CertificationsDark Sky Compliant, DLC Approved, ETL Listed, IP65 / IP66 / IP67, Made in America, ROHS, UL Listed
Color Temp5000K
DimmableNo
Lamp Life:60,000
CRI70
Length22 15/16"
Width22 15/16"
Height4 1/2"
Lumen Output:13,554
ManufacturerLSI Lighting
Product Warranty5 Year
Part NumberCRUS SM SC LED SS CW UE WHT
Minimum Start Temperature-40 Deg F
TechnologyLED - New Fixture
VoltageMultivolt 120V-277V
Write Your Own Review
You're reviewing:LSI Industries CRUS SM SC LED SS CW UE WHT 114W 114 Watt Legacy Surface Mount LED High Intensity Canopy Light Fixture
Your Rating
  • 5 Year Warranty
  • 320W HID Equivalent
  • 400W HID Equivalent
  • Dark Sky Compliant
  • DLC Approved
  • ETL Listed
  • IP65 / IP66 / IP67
  • Made In America Compliant
  • ROHS
  • UL Listed