LSI Industries 5SQ 5x5 Square Straight Steel Pole with Tenon Mount 5IN Square Base Cover
Web PricePlease call 1-800-983-1315 for the lowest available price
|Type of Area||Pole / Street / Parking Lot|
|Certifications||Made in America, UL Listed|
|Dimensions||5" x 7-11 ga x 20'-30'|
|Product Warranty||5 Year|
|Part Number||5SQ T S11G 20 N GA 5BC CLR | 5SQ T S11G 25 N GA 5BC CLR | 5SQ T S07G 30 N GA 5BC CLR|
|Weight Each||180 - 375 lbs|
|Anchor Bolt||0.75 x 30 x 3|
|Pole Weight||9.00 lbs./ft | 12.50 lbs./ft|
|Pole Width||5" x 5"|
LSI Lighting's poles and brackets will complete your lighting assembly and are made with the same quality standards as their fixtures.
The soft corner pole shaft is extruded from seamless alloy aluminum. On Tenon Mount poles, tenon is 2-3/8” O.D. x 4” tall high-strength pipe. Aluminum straight poles are 4”, 5” and 6” square.
On 4” square poles, standard hand hole is 2” x 4” located 12” up from bottom of base plate. On 5” square poles, standard hand hole is 2” x 4” located 14” up from bottom of base plate. On 6” square poles, standard hand hole is 2-5/8” x 5” located 18” up from bottom of base plate. Hand hole gasket is provided. Optional festoon for GFI receptacle (with or without GFI Kit supplied) is available. Minimum height for location of festoon is 18” above standard hand hole.
Pole base is cast from 356 alloy aluminum. Completed assembly is heat-treated to a
T6 temper. Tamper-resistant aluminum nut cover discs are included with anchor base.
Tamper-resistant aluminum nut cover discs are included with anchor base.
Optional two-piece square cast base covers available. Must be ordered separately.
Set of four anchor bolts conform to ASTM F1554 Grade 55. Each bolt is provided with two hex nuts and two flat washers. Bolts have an “L” bend on one end and are galvanized a minimum of 12” on the threaded end.
Ground lug is standard.
Ground Fault Circuit Interrupter
Ground fault circuit interrupter kit is optional.
Pole Preparation (festoon) with GFI Kit must be ordered. Specify location in feet above
base of pole and side orientation. Minimum height for location of festoon is 18” above
standard hand hole.
Baked-on polyester-powder finish provides one year limited warranty.