Lithonia Lighting WF4 SQ S LED 10 Watt Ultra Thin 4 Inch Square Dimmable Recessed Downlight Ceiling Light Fixture with Smooth Trim
Web PricePlease call 1-800-983-1315 for the lowest available price
Lumen:620 (3000K) 650 (4000K)lm
|Type of Area||Apartment Buildings, Home & Architectural, Large Retail & Open Areas, Office & Small Retail, Stairwell|
|Certifications||CSA, Energy Star|
|Lamp Life:||36,000 Hours|
|Dimensions||4.70" x 4.70" x 1.20"|
|Lumen Output:||620 (3000K) 650 (4000K)|
|Product Warranty||5 Year|
|Part Number||WF4 SQ S LED XX XX M6|
|Minimum Start Temperature||-40 Deg F|
|Technology||LED - New Fixture|
|Weight Each||4.10 lbs|
Lithonia Lighting's 4 Inch 14 Watt LED Square Wafer Recessed Downlight offers safe and simple installation process with high quality light output and efficiency. Slim design allows installation with just a 2 inch clearance and can operate in both indoor and outdoor residential, commercial, hospitality or multifamily applications. Only uses 10 Watts to deliver 620-650 lumens with a CRI of 80 and dims down to 10% to maximize energy savings. The high performance coupled with competitive affordability makes this downlight an excellent option for new construction or retrofit installations.
The 4" Wafer-Thin LED recessed downlight with remote driver box combines high quality light output and efficiency while eliminating the pot light housing for competitive affordability. This innovate wafer-slim Type IC design allows easy installation for new construction or remodel from below the ceiling without the requirement of a pot light housing for insulation. The LED module maintains at least 70% light output for 36,000 hours. These LED Wafer downlights are intended for closets, attics, hallways, bathrooms, kitchens, basements, soffits, entry ways, porches, garages, stairwells, corridors, nursing/retirement homes, condos, elevators, apartments, and any other small areas.
IC rated driver and fixture - approved for direct contact with insulation. Aluminum die cast outer frame. Durable, powder coat paint to prevent rust. Square fixture with integral edge-lit LED's. Plenum rated cable connector to connect from module to remote driver box. Isolated driver integrated inside steel remote box with four 7/8" knockouts with slots for pryout. Not suitable for pulling wires.
Wafer-Thin downlight edge-lit LED technology uses light guided plate to distribute light.
Polycarbonate lens provides even illumination throughout the space. Utilized 3000K and 4000K color temperature LEDs.
Connect directly to 120V power supply via provided UL recognized driver. Driver and Fixture Wet location approved and IC rated. High efficient driver with power factor > 0.9. Ambient operating temperature: -40°F (-40°C) to +104°F (+40°C). Dimming down to 10% (See page 2 for recommended dimmers). Standard input wattage is 9.6W, 70 lumens per watt. Actual wattage may differ by +/- 5% when operating at 120V +/- 10%.
CSA certified to Canadian safety standards. ENERGY STAR® qualified. Wet location. Air Tight certified in accordance with ASTM E283-2004.
5-year limited warranty. Complete warranty terms located at: www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
LED Ultra-Thin Wafer Downlight Series: