Lithonia Lighting WF3 ADJ LED 3 Inch LED Adjustable Wafer Gimbal Downlight Fixture
Web PricePlease call 1-800-983-1315 for the lowest available price
|Certifications||CSA, Energy Star, Title 24 Compliant|
|Lamp Life:||50,000 Hours|
|Dimensions||3.00" x 1.30"|
|Product Warranty||5 Year|
|Part Number||WF3 ADJ LED 27K 90CRI MW M6 | WF3 ADJ LED 30K 90CRI MW M6 | WF3 ADJ LED 40K 90CRI MW M6|
|Minimum Start Temperature||-40 Deg F|
Lithonia's 3 Inch Wafer Gimbal was designed with adjustable 20° tilt on 180° rotation. The fixture is low maintenance and 80% more efficient than incandescent recessed fixtures. Energy Star Rated with 5 year warranty and backed by Acuity Brands.
Intended Use: The 3" Wafer-Thin LED gimbal with remote driver box combines high quality light output and efficiency while eliminating the pot light housing for competitive affordability. This innovate wafer-slim Type IC design allows easy installation for new construction or remodel from below the ceiling without the requirement of a pot light housing for insulation. The LED module maintains at least 70% light output for 36,000 hours. These LED Wafer gimbals are intended for closets, attics, hallways, bathrooms, kitchens, basements, soffits, entry ways, porches, garages, stairwells, corridors, nursing/ retirement homes, condos, elevators, apartments, and any other small areas.
Construction: IC rated driver and fixture - approved for direct contact with insulation. Aluminum die cast outer frame. Durable, powder coat paint to prevent rust. Round fixture with integral edge-lit LED's. Plenum rated cable connector to connect from module to remote driver box. Isolated driver integrated inside steel remote box with four 7/8" knockouts with slots for pryout. Suitable for pulling wires with the 12 cubic-inch wiring compartment to accommodate up to (8) 14 gauge insulated conductors, or (6) 12 gauge insulated conductors; making the Wafer LED Downlights much easier to wire in 2in/2out (plus ground) daisy-chain applications and contractor friendly.
Installation: Ideal for shallow ceiling plenum; no housing required. Steel spring clip for easy installation. 3" cut out template is provided to ensure a correct sized hole is cut into ceiling for proper installation of the trim. Size of hole should not exceed 3 1/8 inches for this product. Suitable for installation in t-grid and drop ceiling applications. 6" plenum space required for installation of remote driver box.
Optics: Polycarbonate lens provides even illumination throughout the space. Utilizes 3500K and 5000K option color temperature LEDs. Lens can be tilt up to 20 degrees and rotate up to 180 degrees.
Electrical: Connect directly to 120V power supply via provided UL recognized driver. Driver and Fixture Wet location approved and IC rated. High efficient driver with power factor > 0.9. Ambient operating temperature: -40°F (-40°C) to +104°F (+40°C). Dimming down to 10% (See page 2 for recommended dimmers). Standard input wattage is 8W ,68 lumens per watt. Actual wattage may differ by +/- 5% when operating at 120V +/- 10%. Replaces 50W incandescent.
Listings: CSA certified to US and Canadian safety standards. ENERGY STAR® qualified. Wet location. Air Tight certified in accordance with ASTM E283-2004. NOM certified.
Warranty: 5-year limited warranty. Complete warranty terms located at: