Lithonia Lighting TFX3 LED DLC Premium 188 Watt Outdoor LED Floodlight Fixture Replaces 400W MH
PART# TFX3-LED
Web Price
Please call 1-800-983-1315 for the lowest available price-
Lumen:25,600 Lumenslm
-
Wattage:94 Watt
-
Replacement Equiv:400 Watt HID Incandescent light bulb
-
HID Equivalent | 400 Watt HID |
---|---|
Type of Area | Landscape & Flood, Large Retail & Open Areas, Pole / Street / Parking Lot, Sign & Billboards |
Certifications | DLC Premium, IP65 / IP66 / IP67, UL Listed |
Dimmable | No |
Lamp Life: | 100,000 Hours |
CRI | 70 |
Dimensions | 5" x 18" x 17.75"-20.75" |
Length | 5" |
Width | 18" |
Height | 17.75"-20.75" |
Lumen Output: | 25,600 Lumens |
Manufacturer | Lithonia Lighting |
Product Warranty | 5 Year |
Part Number | TFX3 LED 40K MVOLT IS DDBXD | TFX3 LED 40K MVOLT YK DDBXD |
Minimum Start Temperature | 32 Deg F |
Technology | LED |
Voltage | Multivolt 120V-277V |
Wattage | 94 Watt |
Weight Each | 21 lbs |
Total Harmonic Distortion [THD] | <20% |
Power Factor | >90% |
ShineRetrofits Input:
The TFX LED floodlight family is an industry-leading distributor stock solution providing cost-effective and energy-efficient solutions to replace HID floodlights. In addition, payback can be achieved in less than two years, due to DLC Premium listing and 140 lumens per watt efficacy. This 18 Watt fixture replaces 400W metal halide systems while saving 60% in energy costs. The TFX LED floodlights are part of a complete floodlighting solution including the QTE LED and D-Series LED floods.
Intended Use:
The traditional and robust design of the TFX LED floodlight with energy efficient LEDs, is suitable for replacing up to 1000W Metal Halide. It is ideal for landscape, signage, and accent lighting in heavy commercial and residential applications.
Construction:
Die-cast aluminum housing has integral heat sink fins to optimize thermal management through conductive and convective cooling. The LED driver is mounted in direct contact with the casting to promote low operating temperature and long life. Housing is completely sealed against moisture and environmental contaminants (IP66). Low EPA for optimized wind loading.
Electrical:
Light engine(s) consist of LEDs directly coupled to the housing to maximize heat dissipation and promote long life (up to L90 / 100,000 hrs.).
Installation:
The integral slip fitter option (IS) mates with standard 2 3/8” tenons for pole-top mounting. The yoke mount (YK) option allows mounting to solid surfaces and has a 30” SO cord. TFX luminaires are suitable for aiming in any orientation. TFX is rated for installation on ground. Can be tilted from 0° horizontal facing downwards, up to 180° horizontal facing upwards.
Listings:
UL certified to U.S. and Canadian standards. Luminaire is IP66 rated. Rated for -40°C minimum ambient.
DesignLights Consortium® (DLC) Premium qualified product and DLC qualified product. Not all versions of this product may be DLC Premium qualified or DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified.
Warranty:
5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/support/customer-support/terms-and-conditions
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
The TFX LED floodlight family is an industry-leading distributor stock solution providing cost-effective and energy-efficient solutions to replace HID floodlights. In addition, payback can be achieved in less than two years, due to DLC Premium listing and 140 lumens per watt efficacy. This 18 Watt fixture replaces 400W metal halide systems while saving 60% in energy costs. The TFX LED floodlights are part of a complete floodlighting solution including the QTE LED and D-Series LED floods.
Intended Use:
The traditional and robust design of the TFX LED floodlight with energy efficient LEDs, is suitable for replacing up to 1000W Metal Halide. It is ideal for landscape, signage, and accent lighting in heavy commercial and residential applications.
Construction:
Die-cast aluminum housing has integral heat sink fins to optimize thermal management through conductive and convective cooling. The LED driver is mounted in direct contact with the casting to promote low operating temperature and long life. Housing is completely sealed against moisture and environmental contaminants (IP66). Low EPA for optimized wind loading.
Electrical:
Light engine(s) consist of LEDs directly coupled to the housing to maximize heat dissipation and promote long life (up to L90 / 100,000 hrs.).
Installation:
The integral slip fitter option (IS) mates with standard 2 3/8” tenons for pole-top mounting. The yoke mount (YK) option allows mounting to solid surfaces and has a 30” SO cord. TFX luminaires are suitable for aiming in any orientation. TFX is rated for installation on ground. Can be tilted from 0° horizontal facing downwards, up to 180° horizontal facing upwards.
Listings:
UL certified to U.S. and Canadian standards. Luminaire is IP66 rated. Rated for -40°C minimum ambient.
DesignLights Consortium® (DLC) Premium qualified product and DLC qualified product. Not all versions of this product may be DLC Premium qualified or DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified.
Warranty:
5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/support/customer-support/terms-and-conditions
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.