Due to global supply chain issues, stock levels can change. Please contact support to verify stock levels. Call 1-800-983-1315

Lithonia Lighting CLX Series LED 96 Inch 8 Foot Strip Light Fixture Dimmable


Please call 1-800-983-1315 for the lowest available price
  • Lumen:
    6,000 - 10,000lm
  • Lithonia
Available in increments of 1
Ordering more than 10? Request a quote and we’ll back to you with our lowest price.
More Information
Type of Area Industrial & Warehouse, Large Retail & Open Areas, Office & Small Retail
Ballast Factor 1.00
Certifications CSA, BAA
Dimmable Yes
Lamp Life: Up to 100,000 Hours
CRI 80
Dimensions 96.00" x 3.00" x 2.00"
Length 96.00"
Width 3.00"
Height 2.00"
Lumen Output: 6,000 - 10,000
Manufacturer Lithonia Lighting
Product Warranty 5 Year
Part Number CLX L96 Series
Minimum Start Temperature -40 Deg F
Technology LED - New Fixture
Voltage Multivolt 120V-277V
Weight Each 14.00 lbs
Fixture Length 8 Feet / 96 Inches

ShineRetrofits Input:
The CLX 8-Foot LED Strips are a linear lighting solution available in multiple lengths and lumen packages.  The fixtures are low profile and capable of being continuously row mounted or installed as a stand-alone fixture. The CLX LEDs will replace outdated fluorescent fixtures while providing more light with a fraction of the energy costs.  Perfect for industrial and warehouse applications with better light, efficiency, functionality, appearance and lasts for up to 100,000 hours.

Intended Use: 
The CLX is a linear lighting solution that is available in multiple lengths, lumen packages, and distributions. Designed for versatility, the CLX can address virtually any indoor lighting need. The CLX is also offered in standard and high-efficacy configurations and is capable of being continuously row-mounted or installed as a stand-alone fixture. Ideal for uplight and downlight in commercial, retail, manufacturing, warehouse, and display applications. Certain airborne contaminants can diminish the integrity of acrylic and/or polycarbonate. Click here for the Acrylic-Polycarbonate Compatibility table for suitable uses.

The channel and cover are formed from code-gauge cold-rolled steel. Housing and lens endcaps are injection molded plastic to provide a more architectural look and feel. The endcaps come standard with a 7/8" knock-out for continuous mounting but can be ordered without.

Paint options include high-gloss, baked white polyester (WH), galvanized (GALV), matte black (MB) and smoke gray (SKGY). Five-stage iron phosphate pre-treatment ensures superior paint adhesion and rust resistance.

Offered with acrylic lens and less lens configurations. Provides a choice of optical distributions including, wide, narrow, and aisle. Models with wide diffuse lens provide up to 12% uplight. Please check the IES file for specific uplight value.

Utilizes high-output LEDs integrated on a two-layer circuit board, ensuring cool-running operation. Optional internal pluggable wiring harness for reduced labor cost in row mounting applications. Electronic LED driver is a multi-volt input and 0-10V dimming standard (see Operational Data on page 6 for actual wattage consumption). This fixture is designed to withstand a maximum line surge of 2.5kV at 0.75kA combination wave for indoor locations, for applications requiring a higher level of protection, additional surge protection must be provided. L70>100,000 hours at 25˚C.
LEDs provide a nominal 80 CRI or 90 CRI at 3000K, 3500K,4000K, or 5000K. Lumen output up to 2,500 lumens per foot.

The fixture may be ceiling or wall-mounted (with or without THCLX hanger or angle-mounted with CLXANGBRT), pendant or stem-mounted with appropriate mounting options.

Removing the lens and opening the fixture during installation exposes the LEDs, putting them at risk for damage. 
If you plan to surface mount the fixture, we recommend using the THCLX. This eliminates the need to open the fixture. 
If you plan to continuously row mount, we recommend using the PLR wiring harness option. This eliminates the need to open the fixture. 
Damage to the LEDs caused during installation will not be covered under the warranty.

CSA certified to US and Canadian safety standards. For use in damp locations between -4°F (-20°C) and 104°F (40°C). Optional High Ambient (HA) ranging to 122°F(50°C) available on certain lumen packages (See ambient temperature chart for additional information). DesignLights Consortium® (DLC) Premium qualified product and DLC qualified product. Not all versions of this product may be DLC Premium qualified or DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified.

Buy American Act:
Product with the BAA option is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS, and DOT regulations. Please refer to www. acuitybrands.com/buy-american for additional information.

5-year limited warranty. This is the only warranty provided and no other statements in this specification sheet create any warranty of any kind. All other express and implied warranties are disclaimed. Complete warranty terms located at: www.acuitybrands.com/support/warranty/terms-and-conditions
Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C. Specifications are subject to change without notice.


Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
  • 5 Year Warranty
  • Dimmable
  • DLC Premium
© 2023 ShineRetrofits.com. All Rights Reserved. Your source for induction lights, LED, and fluorescent fixtures and retrofit kits.