Lithonia Lighting CLX Series LED 48 Inch 4 Foot Strip Light Fixture Dimmable

ShineRetrofits Input:
The CLX 4 Foot LED Strips are a linear lighting solution available in multiple lengths and lumen packages.  The fixtures are low profile and capable of being continuous row mounted or installed as a stand-alone fixture. The CLX LEDs will replace outdated fluorescent fixture while providing more light with a fraction of the energy costs.  Perfect for industrial and warehouse applications with better light, efficiency, functionality, appearance and lasts for up to 100,000 hours.

Model Numbers:
CLX L48 3000LM SEF FDL MVOLT GZ10 40K 80CRI WH
CLX L48 3000LM SEF FDL MVOLT GZ10 50K 80CRI WH
CLX L48 3000LM SEF RDL MVOLT GZ10 40K 80CRI WH
CLX L48 3000LM SEF RDL MVOLT GZ10 50K 80CRI WH
CLX L48 5000LM SEF FDL MVOLT GZ10 40K 80CRI WH
CLX L48 5000LM SEF FDL MVOLT GZ10 50K 80CRI WH
CLX L48 5000LM SEF RDL MVOLT GZ10 40K 80CRI WH
CLX L48 5000LM SEF RDL MVOLT GZ10 50K 80CRI WH

Intended Use:
The CLX is a linear lighting solution that is available in multiple lengths, lumen packages and distributions. Designed for versatility, the CLX can address virtually any indoor lighting need. The CLX is also offered in standard and high efficacy configurations and capable of being continuous row mounted or installed as a stand-alone fixture. Ideal for uplight and downlight in commercial, retail, manufacturing, warehouse, and display applications. Certain airborne contaminants can diminish the integrity of acrylic and/or polycarbonate.

Construction:
Channel and cover are formed from code-gauge cold-rolled steel. Finish: Paint options include high-gloss, baked white polyester (WH), galvanized (GALV), matte black (MB) and smoke gray (SKGY). Five-stage iron phosphate pre-treatment ensures superior paint adhesion and rust resistance. Housing and lens endcaps are injection molded plastic to provide a more architectural look and feel. The endcaps come standard with a knock out for continuous mounting but can be ordered without.

Optics:
Offered in lens and less lens configurations. Provides a choice of optical distributions including, wide, narrow, and aisle.

Electrical:
Utilizes high-output LEDs integrated on a two-layer circuit board, ensuring coolrunning operation. Optional internal pluggable wiring harness for reduced labor cost in row mounting applications. (See PLR_ ordering information on page 8.) Electronic LED driver is rated for 75 input watts maximum (see Operational Data on page two for actual wattage consumption), multi-volt input and 0-10V dimming standard. This fixture is designed to withstand a maximum line surge of 2.5kV at 0.75kA combination wave for indoor locations, for applications requiring higher level of protection additional surge protection must be provided. Enabled with Atrius™ - The CLX is enabled with Atrius™, making it part of the Atrius™ Sensory Network and ready to deliver valuable data and connectivity to the Atrius™ Platform. For more information concerning Atrius™ solutions, please refer to www.acuitybrands.com/atrius. LEDs provide nominal 80 CRI or 90CRI at 3000 K, 3500 K,4000 K, or 5000 K. Lumen output up to 2,500 lumens per foot.

Installation:
Fixture may be ceiling or wall mounted (with or without THCLX hanger or angle mounted with CLXANGBRT), pendant or stem mounted with appropriate mounting options.

Listings:
CSA certified to US and Canadian safety standards. For use in damp locations between -4°F (-20°C) and 104°F (40°C). Optional High Ambeint (HA) ranging to 122°F(50°C) available on certian lumen packages.

Warranty:
5-year limited warranty. Complete warranty terms located at: www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.

CLX LED Strip Light Series: