Lithonia Lighting 6BPMW LED M6 12.7 Watt 5 / 6 inch White LED Recessed Baffle Downlight Retrofit Module
Web PricePlease call 1-800-983-1315 for the lowest available price
|Type of Area||Apartment Buildings, Home & Architectural, Office & Small Retail, Stairwell|
|Certifications||CSA, Energy Star, Lighting Facts, LM79 / LM80, Title 24 Compliant|
|Lamp Life:||50,000 Hours|
|Dimensions||7.63" x 7.63" x 3.88"|
|Product Warranty||5 Year|
|Part Number||6BPMW LED M6|
|Weight Each||1.50 lbs|
Lithonia Lighting's 5 / 6 Inch P Series LED Recessed Downlights replace 65 Watt incandescent lights while using much less energy. The 6" downlight delivers 725 lumens with a 3000K color temperature, dimming capabilities, and color rendering at a CRI of 83. Energy Star Rated and ideal for either indoor and outdoor, residential or commercial, for new construction or retrofit applications. Includes an E26 adaptor to install the module into current housing and unique torsion spring or friction clip retention allows fitment into nearly 100% of installed cans.
Our recessed LED module is the most economical means to create a well lit environment with exceptional energy efficiency and near zero maintenance. Great for retrofit into existing downlight cans or new construction and remodel applications. The LED module maintains at least 70% light output for 50,000 hours. Indoor and Outdoor Use.
Aluminum die cast reflector with deep baffle configuration for reduced glare. Combined LED and driver printed circuit board attached. Inner reflector cone funnels light through the pressed-in diffused lens.
Diffused lens at end of mixing chamber to provide even light distribution for general illumination, equivalent to 65W BR30 lamp.
Wide flood beam angle at >45°.
Center 2 Edge™ (patent pending) technology created for a single point source. Primary power disconnect provided for simple connection to a dedicated LED connector in the housing. Dimming down to 10%. For compatible dimmers, refer to Compatible Dimmers Chart.
725 Lumens P series has an input wattage of 12.7 watts, 57 lumens per watt, equivalent to 65-watt incandescent.
P Series’ patent pending driver has zero inrush, which allows power loads to be calculated with actual rated wattages.
Example: 47 units of 6BPMW LED fixtures can be installed in line with a 600-watt dimmer. 600W/12.7W = 47 fixtures.
Suitable for installation in standard and shallow-height rough-in sections.
E26 socket adapter and splice kit ships standard. This enables easy installation or permanent conversion to an LED source for Title 24 compliance. Friction clips included to allow fitment into cans without torsion brackets from an inside diameter of 6.0" to 7.0".
CSA certified to US and Canadian safety standards. ENERGY STAR® qualified. Wet location listed. WSEC ASTM E283 for Air-Tight (with IC housings). California T24 compliant.
5-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
NOTE: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25°C.
Specifications subject to change without notice.