Lithonia Lighting 65SEMW SWW5 90CRI M6 10.5 Watt 5 / 6 Inch LED Recessed Downlight Dimmable, 5 CCT Switchable

ShineRetrofits Input:
Lithonia Lighting's E Series LED Recessed Downlights replace 65 Watt BR30 lights while using much less energy.  The 5-6" downlight delivers 900 lumens with switchable color temperature (2700K, 3000K, 3500K, 4000K, 5000K), dimming capabilities, and excellent color rendering at a CRI of 93.  Energy Star Rated and ideal for either indoor and outdoor, residential or commercial, for new construction or retrofit applications. Includes an E26 adaptor to install the module into current housing. Complies with Title 24 part 6 for high efficient LED light sources.

Intended Use:
Our recessed LED module is the most economical means to create a well lit environment with exceptional energy efficiency and near zero maintenance. Great for retrofit into existing downlight cans or new construction and remodel applications. Adjustable torsion spring and retention etentiondownlight cans or new construction and remodel applications. Adjustable torsion spring and retention hours. Indoor and outdoor use.

Construction:
Aluminum spun reflector with deep baffle configuration for reduced glare. Combined LED and driver printed circuit board attached. Inner reflector cone funnels light through the pressed-in diffused lens.

Optics:
Diffused lens at end of mixing chamber to provide even light distribution for general illumination, equivalent to 65W BR30 lamp.
Wide flood beam angle at >45°.

Electrical:
Center 2 Edge™ (patent pending) technology created for a single point source. Primary power disconnect provided for simple connection to a dedicated LED connector in the housing. Dimming down to 10%. For compatible dimmers, refer to Compatible Dimmers Chart. 835-lumen E series has an input wattage of 10.5 watts, 80+ lumens per watt, equivalent to 65-watt incandescent. E Series’ patent pending driver has zero inrush, which allows power loads to be calculated with actual rated wattages. Example: 50 units of 65BEMW LED fixtures can be installed in line with a 600-watt dimmer. 600W/11.9W=50 fixtures.

Installation:
Suitable for installation in standard and shallow-height rough-in sections. E26 socket adapter
ships standard, except on 65BEMW LED 27K product shipping to California. Twin torsion
springs ensure easy installation for 5" and 6" recessed housings.

Listings:
CSA certified to US and Canadian safety standards. ENERGY STAR® certified. Can be used to. comply with California Title 24 Part6 High Efficacy LED Light Source Requirements. Wet location listed. WSEC ASTM E283 for Air-Tight (with IC housings).

Warranty:
5-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
NOTE: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25°C.
Specifications subject to change without notice.