Lithonia Lighting 4JBK ADJ 30K 90CRI MW M6 8 Watt 4 Inch White Direct Wire LED Round Adjustable Gimbal Recessed Canless Downlight Kit
PART# 4JBK ADJ 30K 90CRI MW M6
Web PricePlease call 1-800-983-1315 for the lowest available price
|Type of Area||Apartment Buildings, Home & Architectural, Office & Small Retail, Stairwell|
|Certifications||Energy Star, ETL Listed, Lighting Facts, LM79 / LM80, Title 24 Compliant|
|Lamp Life:||50,000 Hours|
|Dimensions||4.88" x 4.88" x 4.67"|
|Product Warranty||5 Year|
|Part Number||4JBK ADJ 30K 90CRI MW M6|
|Minimum Start Temperature||0 Deg F|
|Weight Each||1.05 lbs|
Lithonia Lighting's OneUp Square Recessed Kits are a quick and easy-to-install direct wire downlight that features a unique "canless" design. There is no housing required and a tool less installation that takes about 1/3 of the time compared to conventional recessed can lights. This 4 Inch Round Adjustable Gimbal is great for indoor or outdoor residential, hospitality, or commercial applications. Energy Star Certfied, Damp Location Listed, TRIAC dimmable down to 10%, and rated for a 50,000 hour life!
The OneUp™ recessed direct-wire LED downlight includes integrated junction box, trim, pre-installed non-metallic push-in connectors, and wago connectors in one package. The OneUp is the most economical means to create a well lit environment with exceptional energy efficiency and near zero maintenance.
Spun steel, round baffle trim. Integrated galvanized steel junction box with captive door for easy access. Suitable for daisy chaining (pulling wires). Available in 3000K color temperature LEDs.
Round adjustable gimbal w/180 degrees of rotation and 35 degrees of adjustable tilt in both directions. Diffused lens provides even light distribution for general illumination, equivalent to 65W incandescent flood lamp. Wide flood beam angle at >90°. CRI >90. Maintains at least 70% light output for 50,000 hours.
Tool-less installation. Secure trim retention with two side-mounted spring clips for easy installation in plaster, sheet rock, or plywood ceilings. Two non-metallic push-in connectors and three wago connectors pre-installed. Rated for Type IC installations. Maximum of 4 No. 12AWG through branch circuit conductor suitable for 90°C permitted in box. Ground wire provided.
LED module with high-efficiency on board driver. Dimming down to 10%. For compatible dimmers, refer to: Compatible dimmers Chart. Actual wattage may differ by +/-5% when operating at 120V +/-10%.
ETL certified to US and Canadian safety standards. Can be used to comply with California Title 24 Part6 High Efficacy LED Light Source Requirements. WSEC ASTEM E283 for Air-Tight rated with gasket or caulking between fixture trim and ceiling. ENERGY STAR® certified. Damp location listed.
5-year limited warranty. Complete warranty terms located at:
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.