Lithonia Lighting 4BPMW LED M6 10 Watt 4 inch White LED Recessed Baffle Downlight Retrofit Module

PART#
4BPMW LED M6
Web Price
Please call 1-800-983-1315 for the lowest available price
$36.00
  • Lumen:
    620lm
  • Wattage:
    10 Watt
  • acuity
Available in increments of 1
Ordering more than 10? Request a quote and we’ll back to you with our lowest price.
Shine Recommended
Color Temperature:
3000K
More Information
UPC 820476235016
Type of Area Apartment Buildings, Home & Architectural, Office & Small Retail, Stairwell
Certifications CSA, Energy Star, Lighting Facts, LM79 / LM80, Title 24 Compliant
Color Temp 3000K
Dimmable Yes
Lamp Life: 50,000 Hours
CRI 83
Dimensions 5.25" x 5.25" x 3.70"
Length 5.25"
Width 5.25"
Height 3.70"
Lumen Output: 620
Manufacturer Lithonia Lighting
Product Warranty 5 Year
Part Number 4BPMW LED M6
Technology LED
Voltage 120V
Wattage 10 Watt
Weight Each 1.50 lbs

ShineRetrofits Input:
Lithonia Lighting's 4 Inch P Series LED Recessed Downlights replace 65 Watt BR30 lights while using much less energy.  The 4" downlight delivers 625 lumens with a 3000K color temperature, dimming capabilities, and color rendering at a CRI of 83.  Energy Star Rated and ideal for either indoor and outdoor, residential or commercial, for new construction or retrofit applications. Includes an E26 adaptor to install the module into current housing and friction clip retention allows fitment into nearly 100% of installed cans.

Intended Use:
Our recessed LED module is the most economical means to create a well lit environment with exceptional energy efficiency and near zero maintenance. Great for retrofit into existing 
downlight cans or new construction and remodel applications.  The LED module maintains at least 70% light output for 50,000 hours. Indoor and Outdoor Use.

Construction:
Aluminum die cast reflector with deep baffle configuration for reduced glare. Combined LED and driver printed circuit board attached. Inner reflector cone funnels light through the 
pressed-in diffused lens.

Optics:
Diffused lens at end of mixing chamber to provide even light distribution for general illumination, equivalent to 65W BR30 lamp.

Wide flood beam angle at >45°.

Installation:
Suitable for installation in standard and shallow-height rough-in sections.

E26 socket adapter and splice kit ships standard.  This enables easy installation or permanent conversion to an LED source for Title 24 compliance. 
Friction clips included to allow fitment into cans without torsion brackets from an inside diameter of 4.0" to 4.5".

Listings:
CSA certified to US and Canadian safety standards.  Wet location 
listed for indoor use only. WSEC ASTM E283 for Air-Tight (with IC housings). California T24 compliant.

Warranty:
5-year limited warranty. Complete warranty terms located at 
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
NOTE: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25°C.
Specifications subject to change without notice.

Write Your Own Review
You're reviewing:Lithonia Lighting 4BPMW LED M6 10 Watt 4 inch White LED Recessed Baffle Downlight Retrofit Module
Your Rating
  • 5 Year Warranty
  • Dimmable
  • Energy Star
  • Lighting Facts
  • Title 24 Compliant

© 2017 ShineRetrofits.com. All Rights Reserved. Your source for induction lights, LED, and fluorescent fixtures and retrofit kits.