Lithonia Lighting 4BEMW LED 27K 90CRI M6 4 Inch 10 Watt Recessed Downlight Dimmable 65 Watt Equivalent Title 24 Compliant
PART# 4BEMW LED 27K 90CRI M6
Web PricePlease call 1-800-983-1315 for the lowest available price
|Type of Area||Apartment Buildings, Home & Architectural, Office & Small Retail, Stairwell|
|Certifications||CSA, Energy Star, Lighting Facts, LM79 / LM80, Title 24 Compliant|
|Lamp Life:||54,000 Hours|
|Dimensions||5.25" x 2.50"|
|Product Warranty||5 Year|
|Part Number||4BEMW LED 27K 90CRI M6|
|Weight Each||1.25 lbs|
Lithonia Lighting's E Series LED Recessed Downlights replace 65 Watt BR30 lights while using much less energy. The 4" downlight delivers 650 lumens with a 2700K color temperature, dimming capabilities, and excellent color rendering at a CRI of 90. Energy Star Rated and ideal for either indoor and outdoor, residential or commercial, for new construction or retrofit applications. Includes an E26 adaptor to install the module into current housing.
Our recessed LED module is the most economical means to create a well lit environment with exceptional energy efficiency and near zero maintenance. Great for retrofit into existing downlight cans or new construction and remodel applications. Compliant friction clip retention allos fitment into nearly 100% of installed cans. The LED module maintains at least 70% light output for 54,000 hours. Indoor and Outdoor use.
Aluminum spun reflector with deep baffle configuration for reduced glare. Combined LED and driver printed circuit board attached. Inner reflector cone funnels light through the pressed-in diffused lens. Fixture includes 4 inch aperature and 5.25 inch trim.
Diffused lens at end of mixing chamber to provide even light distribution for general illumination, equivalent to 65W BR30 lamp.
Wide flood beam angle at >45°.
Center 2 Edge™ (patent pending) technology created for a single point source. Primary power disconnect provided for simple connection to a dedicated LED connector in the housing. Dimming down to 10%. For compatible dimmers, refer to Compatible Dimmers Chart.
600L-lumen E series has an input wattage of 10.3 watts, 58 lumens per watt, equivalent to 65-watt incandescent.
E Series’ patent pending driver has zero inrush, which allows power loads to be calculated with actual rated wattages.
Example: 65 units of 45BEMW LED fixtures can be installed in line with a 600-watt dimmer. 600W/10.3W = 65 fixtures.
Suitable for installation in standard and shallow-height rough-in sections.
E26 socket adapter ships standard.
Friction clips allow fitment into cans with an inside diameter of 4.0" to 4.5"
CSA certified to US and Canadian safety standards. ENERGY STAR® qualified. Wet location listed. WSEC ASTM E283 for Air-Tight (with IC housings).
5-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
NOTE: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25°C.
Specifications subject to change without notice.