Due to global supply chain issues, stock levels can change. Please contact support to verify stock levels. Call 1-800-983-1315

70 Watt HID Retrofit

Popular and proven lighting retrofit kits for 70 watt metal halide, high pressure sodium, low pressure sodium, or mercury vapor fixtures. Whether you have an indoor or outdoor fixture, these typically fit inside and provide great energy savings with decreasing or eliminating maintenance costs, all while increasing light levels. LED, induction, and perhaps fluorescent technology are all included below. There are also some different Kelvin temperature options, but most applications now use 5000K-5500K, which are brighter and emit a pure daylight white color, like the color of the white on this page.

Please check the dimensions of each product to ensure fitment into your fixture. If they don't fit and you have a moderately old fixture, we have plenty of new fixture options as well if a retrofit won't work.

If none of these fit your needs, please contact us or email our sales team and we'll be happy to help you find the right kit.

View as Grid List

1 Item

per page
Set Descending Direction
View as Grid List

1 Item

per page
Set Descending Direction

All of the products listed above are popular items typically used to replace 70 watt metal halide or sodium lighting components in your existing light fixture. Most are LED as they are smaller format and pack more of a punch for the wattage used. That also means they are more efficient than induction and fluorescent.

You will notice that some LED retrofit kits contain only diodes on one side so they shine in only one direction. These are great for pole lights, wall packs, and any other fixtures where need to shine in more of a straight line. They are also ultra-efficient because you don't lose light anymore by using the old reflector in the fixture. These have the LED driver inside the unit, so you just bypass the existing existing/old ballast and wire the power or circuit directly to the socket. We do have options with external LED drivers but most of these smaller units have them internally and save space.

Most of the LED retrofit bulbs have a 360 degree or round light spread. These act more like a traditional light bulb, shining in all directions. Most of the bases in this wattage are E26 medium size, like a traditional bulb has. We do have mogul options though if needed with these same kits. You will save over 50% energy using any one of these bulbs, with the new wattage using around 35W or less to replace a 70W HID, which uses closer to 80-85 watts of power with the old ballasts.

We also have a couple of PAR38 and PAR56 lamp options that are used for spot lighting.  These are very directional and shine a far distance using very little wattage.

If none of these fit your needs, please contact us or email our sales team and we'll be happy to help you find the right kit. Please check the dimensions to make sure these will fit. With smaller fixtures in this wattage range it is typical that a retrofit will not work, and we will have to go with a new fixture.

© 2022 ShineRetrofits.com. All Rights Reserved. Your source for induction lights, LED, and fluorescent fixtures and retrofit kits.