100 Watt HID Retrofit
Popular and proven lighting retrofit kits for 100 watt metal halide, high pressure sodium, low pressure sodium, or mercury vapor fixtures. Whether you have an indoor or outdoor fixture, these typically fit inside and provide great energy savings with decreasing or eliminating maintenance costs, all while increasing light levels. LED, induction, and perhaps fluorescent technology are all included below. There are also some different Kelvin temperature options, but most applications now use 5000K-5500K, which are brighter and emit a pure daylight white color, like the color of the white on this page.
Please check the dimensions of each product to ensure fitment into your fixture. If they don't fit and you have a moderately old fixture, we have plenty of new fixture options as well if a retrofit won't work.
If none of these fit your needs, please contact us or email our sales team and we'll be happy to help you find the right kit.
Green Creative 40HIDWP/277V/E26 40 Watt LED Wall Pack Retrofit E26 Lamp - Replaces 100-175W HID
PART# 40HIDWP/840/277V/E26 | 40HIDWP/850/277V/E26$70.49
Light Efficient Design LED-8018E-G2 25 Watt A Series LED High Output 360 Degree Omni Directional Design Bollard Retrofit Lamp E26 Base 200W Incandescent 150W HID Equivalent
PART# LED-8018E30-G2 | LED-8018E40-G2 | LED-8018E50-G2$32.49
Light Efficient Design LED-8017E-G2 20 Watt A Series LED High Output 360 Degree Omni Directional Design Bollard Retrofit Lamp E26 Base 150W Incandescent 100W HID Equivalent
PART# LED-8017E30-G2 | LED-8017E40-G2 | LED-8017E50-G2 | LED-8017E30-G2-DIM | LED-8017E40-G2-DIM | LED-8017E50-G2-DIM$25.99
NaturaLED 4610 LED27HID/EX39/418L/850 DLC Listed 27 Watt LED Corn Light Retrofit Lamp for 100W HID EX39 Base
All of the products listed above are popular items typically used to replace 100 watt metal halide or sodium lighting components in your existing light fixture. Most are LED as they are smaller format and pack more of a punch for the wattage used. That also means they are more efficient than induction and fluorescent.
You will notice that some LED retrofit kits contain only diodes on one side so they shine in only one direction. These are great for pole lights, wall packs, and any other fixtures where need to shine in more of a straight line. They are also ultra-efficient because you don't lose light anymore by using the old reflector in the fixture. These have the LED driver inside the unit, so you just bypass the existing existing/old ballast and wire the power or circuit directly to the socket. We do have options with external LED drivers but most of these smaller units have them internally and save space.
Most of the LED retrofit bulbs have a 360 degree or round light spread. These act more like a traditional light bulb, shining in all directions. Most of the bases in this wattage are E26 medium size, like a traditional bulb has. We do have mogul options though if needed with these same kits. You will save over 40% energy using any one of these bulbs, with the new wattage using around 60W or less to replace a 100W HID, which uses closer to 100-115 watts of power with the old ballasts.
We also have a couple of PAR38 and PAR56 lamp options that are used for spot lighting. These are very directional and shine a far distance using very little wattage. 100W metal halide and high pressure sodium fixtures are also popular in high bay and warehouse lighting, and some of the units are made to install in the existing low bay light fixtures.
If none of these fit your needs, please contact us or email our sales team and we'll be happy to help you find the right kit. Please check the dimensions to make sure these will fit. With smaller fixtures in this wattage range it is typical that a retrofit will not work, and we will have to go with a new fixture.