Due to global supply chain issues, stock levels can change. Please contact support to verify stock levels. Call 1-800-983-1315

Keystone KT-EMRG-1400/B T8 or T12 Emergency Ballast 1400 Lumen 90 Minutes

PART# KT-EMRG-1400/B

$112.43
Please call 1-800-983-1315 for the lowest available price
  • Keystone Technologies
Available in increments of 1
Ordering more than 10? Request a quote and we’ll back to you with our lowest price.
More Information
Type of Area Office & Small Retail, Schools, Commercial Offices, Retail
Certifications UL Listed
Dimmable No
Dimensions 13.40" x 2.40" x 1.50"
Length 13.40"
Width 2.40"
Height 1.50"
Manufacturer Keystone Technologies
Product Warranty 5 Year
Part Number KT-EMRG-1400/B
Technology Emergency Ballast

ShineRetrofits Input:
Keystone's emergency ballast is for use in either new or current fixtures when emergency lighting is necessary. The ballast works with fixtures that hold from one to four lamps, with or without AC ballasts. It features a time delay to help overcome end-of-life circuit protection, and its discharged battery refreshes in 24 hours. 
 
FEATURES:
Input Voltage: 120/277V, 60Hz
Light Output: 1400 Lumen
Illumination Time: 90 Minutes
Battery: 6V Sealed NiCD
Warranty: 5 Years
 
OPERATING DETAILS
• For use in new or existing fixtures, with or without an AC ballast, where emergency lighting is needed.
• Operates one or two lamps in the emergency mode.
• 2-in-1 LED indicator light and push-to-test switch (for mandated code compliance testing).
• Internal battery automatically connects to the fluorescent lamp(s) for minimum 90-minute emergency illumination via an internal solid-state transfer switch.
• A discharged battery completely recharges in 24 hours, via a fully automatic solid-state, two-rate charger.
• Features Time Delay Technology which helps to overcome end-of-life circuit protection.
 
LAMP COMPATIBILITY
• Compatible with most one-, two-, three-, and four-lamp electronic, standard and dimming AC ballasts.
 
MOUNTING
• UL listed for factory or field installation. Suitable for damp location.
• Can be mounted inside, on top, or remote from of the fixture.*
• Designed to be used in both switched and unswitched fixtures.
 
* When battery packs are remote mounted, the remote distance cannot exceed 1/2 of the distance from ballast to lamp specified by the AC ballast manufacturer.
The maximum allowable remote mounting distance is 50 feet.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
  • 5 Year Warranty
  • UL Listed
© 2023 ShineRetrofits.com. All Rights Reserved. Your source for induction lights, LED, and fluorescent fixtures and retrofit kits.