Juno Lighting IC1RLED-G4-09LM 11.6 Watts 4 Inch IC Rated Remodel Recessed Housing
Web PricePlease call 1-800-983-1315 for the lowest available price
|Certifications||CUL Listed, Energy Star, UL Listed|
|Lamp Life:||50,000 Hours|
|Dimensions||14.13" x 12.50" x 4.37"|
|Product Warranty||5 Year|
|Minimum Start Temperature||-13 Deg F|
|Weight Each||3.5 lbs|
Juno Lighting's 4 Inch LED recessed housing is energy efficient and designed for remodel construction. It is IC rated and can be completely covered with insulation and adjusts vertically to accomodate up to a 1.5 inch ceiling thickness. Replaces a 75W incandescent source and offers the highest quality LEDs exceeding Energy Star requirements. Multivolt operates with 12.8W and the 120V operates on 11.6W.
LED Light Engine: LED array attached to high purity aluminum, thermally conductive inner housing provides superior heat transfer to ensure long life of the LED • Replaceable light engine mounts directly to inner housing assembly and incorporates the latest generation, high lumen output LED array • LEDs are binned within a 3-step MacAdam Ellipse exceeding ENERGY STAR® requirements for superior fixture to fixture color uniformity • 2700K, 3000K, 3500K, or 4000K color temperatures available • 90 CRI minimum.
Optical System: Angle-cut aluminum reflector and specular clear kicker reflector directs light toward wall for uniform illumination on vertical surfaces while concealing LED optic assembly and minimizing glare • LEDs are concealed by high transmission diffusing lens.
Aesthetic Trim Selections: Recessed lensed wall wash trim • Shadow free, knife edge design blends seamlessly into ceiling • Reflector finishes include clear, haze, wheat haze and white painted.
LED Driver: Choice of dedicated 120 volt (120) driver or universal voltage (MVOLT) driver that accommodates input voltages from 120-277 volts AC at 50/60Hz • Power factor > 0.9 at 120V input • 120 volt only driver is dimmable with the use of most incandescent, magnetic low voltage and electronic low voltage wall box dimmers • Universal voltage driver is dimmable
with the use of most 0-10V wall box dimmers • For a list of compatible dimmers, see JUNOICLED-DIM • Mounted inside housing for easy access from below ceiling.
Life: Rated for 50,000 hours at 70% lumen maintenance.
Labels: ENERGY STAR® Certified when used with select trims • Certified to the high efficacy requirements of California T24 with select trims • UL listed for U.S. and Canada through-branch wiring, damp locations • Union made • UL and cUL.
Testing: All reports are based on published industry procedures; field performance may differ from laboratory performance.
Product specifications subject to change without notice.
Housing: Designed for use in IC (insulated ceiling) or non-IC construction • Aluminum housing sealed for Air-Loc® compliance • Housing is vertically adjustable to accommodate up to a 11⁄2” ceiling thickness.
Junction Box: Pre-wired junction box provided with (6) 1⁄2” and (1) 3⁄4” knockouts, (4) knockouts for 12/2 or 14/2 NM cable and ground wire • UL listed and cUL listed for through-branch wiring, maximum 6 #12 branch circuit conductors • Junction box provided with removable access plates • Knockouts equipped with pryout slots • Quick connect electrical connectors supplied as standard for fast, secure installation.
Mounting Frame: 22-gauge die-formed galvanized steel mounting frame • Rough-in section (junction box, mounting frame, housing and bar hangers) fully assembled for ease of installation.
Real Nail 3 Bar Hangers: Patented (US Patent D552,969) Real Nail® 3 bar hangers: telescoping system permits quick placement of housing anywhere within 24” O.C. joists or suspended ceilings • Includes removable nail for repositioning of fixture in wood joist construction • Integral T-bar notch and clip for suspended ceilings.
* Nominal input wattage @ 120-volt operation with dedicated 120-volt
driver under stable operating conditions.