Howard Lighting VSA8A432ASEMV000000I VSA8 4 Lamp T8 Fluorescent Enclosed Vapor Dust Water Proof Tight Light Fixture NSF IP67
PART# VSA8A432ASEMV000000I
Web Price
Please call 1-800-983-1315 for the lowest available price
-
Lumen:11,600lm
-
Wattage:128 Watt
-
Replacement Equiv:100 Watt HID Incandescent light bulb
-
| UPC | 799385-04064 |
|---|---|
| HID Equivalent | 100 Watt HID |
| Mounting Height | 11 - 13 Feet |
| Type of Area | Hangers & Storage, Industrial & Warehouse, Parking Garage |
| Ballast Factor | Normal .87-.88 |
| Certifications | CEE Listed, IP65 / IP66 / IP67, NEC, NSF, UL Listed |
| Dimmable | No |
| Number of Lamps | 4 Lamp |
| Lamps Included | No |
| Dimensions | 100" x 7.33" x 4.13" |
| Length | 100.00" |
| Width | 7.33" |
| Height | 4.13" |
| Lumen Output: | 11,600 |
| Manufacturer | Howard Lighting |
| Product Warranty | 1 Year |
| Part Number | VSA8A432ASEMV000000I |
| Minimum Start Temperature | 0 Deg F |
| Technology | T8 Fluorescent |
| Voltage | Multivolt 120V-277V |
| Wattage | 128 Watt |
| Weight Each | 15.00 lbs |
| Fixture Length | 4 Feet / 48 Inches |
| Bulbs Included? | No |
| Bulb Type | Linear Tube |
Minimum purchase as the units must ship by freight and require two pallets.
ShineRetrofits Input:
The Howard Lighting VSA8 Series operates four lamps and comes standard with a Howard ballast. The eight-foot vaporproof fluorescent strip is made of reinforced, corrosion-resistant fiberglass and features a closed cell polyester gasket. Installation is easy thanks to easy access to the wiring compartment and ballast, and knockouts on each end.
Housing:
• One-piece upper body; no seams to crack, break, or leak
• Reinforced fiberglass body is rugged and corrosion resistant
• 5VA Flammability Rating• Clear polycarbonate latches standard
• Fourteen latches for positive lens retention
• Latches designed to accept screws to make enclosure tamper resistant
- Polycarbonate latches accepts #4 - 1/2” screw
- Stainless steel latches accepts #6 - 3/8” screw
• White polyethylene molded end plugs for use as knockouts
• High gloss, baked enamel reflective front
Gasket:
• Closed cell polyester gasket
• Poured gasket seamlessly fills channel for maximum seal
• Gasket has dry skin that will not stick to the mating surface
• High gasket compression recovery ensures a solid seal over life of fixture
Diffuser:
• Injection molded for maximum strength and precise detail
• Lineal prisms on sides reduce glare
• Continuous formed perimeter provides for positive seal
• Materials:
100% Virgin Impact Resistant Acrylic
Long lasting clarity and resistance to weathering
• Acrylic/DR blend for superior impact resistance, long life and clarity
• Ribbed geometry designed for maximum strength
• Continuous formed perimeter provides for positive seal
Installation:
• Shipped fully wired with Howard ballast
• Easy access to wiring compartment and ballast via removable gear tray
• Gear tray tethered to housing by two lanyards for extra safety
• Knockouts on each end
• Spring-mount, stainless steel bracket allows for surface or chain mount
• Brackets Install first, then snap securely onto fixture
• NEC compliant luminaire power disconnect standard
Ballast:
• Electronic, Inherent Thermal Protection, Class P, Sound rated A
• UL Listed
Quality Assurance:
• System Tested, Designed, Approved, and Manufactured by Howard Lighting
Products in Mendenhall, Mississippi.
Applications:
- Entrance Lighting
- Car Washes
- Public Access
- Parking Structions
- Beverage Industry
- Food Processing
- Construction Sites
- Industrial Lighting
Certifications:
IP67 NSF
