Howard Lighting VSA4A154APSMV000000I VSA4 1 Lamp 4 T5 HO Fluorescent Enclosed Vapor Dust Water Proof Tight Light Fixture NSF IP67

PART#
VSA4A154APSMV000000I
Web Price Please call 1-800-983-1315 for the lowest available price
Special Price $84.59 Regular Price $92.06
Rating:
100% of 100
  • Lumen:
    19,600 lumenslm
  • Wattage:
    54 Watt
  • howard
Available in increments of 1
Ordering more than 10? Request a quote and we’ll back to you with our lowest price.

ShineRetrofits Input:
The Howard Lighting VSA4 Series 4-foot vaporproof fluorescent strip operates one lamp and comes standard with a Howard ballast. The fixture is made all of one piece, allowing no moisture or dust to get in. The included ballast is UL Listed, and the fixture is tested and manufactured in the USA.

Housing
• One-piece upper body; no seams to crack, break, or leak
• Reinforced fiberglass body is rugged and corrosion resistant
• 5VA Flammability Rating• Clear polycarbonate latches standard
• Fourteen latches for positive lens retention
• Latches designed to accept screws to make enclosure tamper resistant
- Polycarbonate latches accepts #4 - 1/2” screw
- Stainless steel latches accepts #6 - 3/8” screw
• White polyethylene molded end plugs for use as knockouts
• High gloss, baked enamel reflective front

Gasket

• Closed cell polyester gasket
• Poured gasket seamlessly fills channel for maximum seal
• Gasket has dry skin that will not stick to the mating surface
• High gasket compression recovery ensures a solid seal over life of fixture

Diffuser
• Injection molded for maximum strength and precise detail
• Lineal prisms on sides reduce glare
• Continuous formed perimeter provides for positive seal
• Materials:

     100% Virgin Impact Resistant Acrylic
      Long lasting clarity and resistance to weathering

• Acrylic/DR blend for superior impact resistance, long life and clarity
• Ribbed geometry designed for maximum strength
• Continuous formed perimeter provides for positive seal


Installation

• Shipped fully wired with Howard ballast
• Easy access to wiring compartment and ballast via removable gear tray
• Gear tray tethered to housing by two lanyards for extra safety
• Knockouts on each end
• Spring-mount, stainless steel bracket allows for surface or chain mount
• Brackets Install first, then snap securely onto fixture
• NEC compliant luminaire power disconnect standard

Ballast
• Electronic, Inherent Thermal Protection, Class P, Sound rated A
• UL Listed


Quality Assurance

• System Tested, Designed, Approved, and Manufactured by Howard Lighting

Products in Mendenhall, Mississippi.

Applications

  • Entrance Lighting
  • Car Washes
  • Public Access
  • Parking Structions
  • Beverage Industry
  • Food Processing
  • Construction Sites
  • Industrial Lighting

Certifications
IP67 NSF 

More Information
HID Equivalent50 Watt HID, 70 Watt HID
Mounting Height8 - 10 Feet
Type of AreaHangers & Storage, Parking Garage
Ballast FactorNormal .87-.88
CertificationsIP65 / IP66 / IP67, Made in America, NSF, UL Listed
DimmableNo
Number of Lamps1 Lamp
Dimensions51.6" L x 7.33" W x 4.13" H
Length51.60"
Width7.33"
Height4.13"
Lumen Output:19,600 lumens
ManufacturerHoward Lighting
Product Warranty1 Year
Part NumberVSA4A154AHEMV000000I
TechnologyT5HO Fluorescent
VoltageMultivolt 120V-277V
Wattage54 Watt
Weight Each9.00 lbs
Bulbs Included?No
Bulb TypeLinear Tube
Write Your Own Review
You're reviewing:Howard Lighting VSA4A154APSMV000000I VSA4 1 Lamp 4 T5 HO Fluorescent Enclosed Vapor Dust Water Proof Tight Light Fixture NSF IP67
Your Rating
  • 1 Year Warranty
  • 50W HID Equivalent
  • 70W HID Equivalent
  • IP65 / IP66 / IP67
  • Made In America Compliant
  • UL Listed
Calculate your Energy Savings
Add More Details For An Accurate Calculation
Energy Savings
Project Cost & Savings
Environmental Savings