Howard Lighting PAC0014 1-2 Lamp Fluorescent Emergency Ballast 1400 Lumens
Web PricePlease call 1-800-983-1315 for the lowest available price
|Certifications||NEC, NFPA, OSHA, UL Listed|
|Number of Lamps||2 Lamp|
|Dimensions||13.4"L x 1.5"H x 2.4"W|
|Product Warranty||5 Year|
|Minimum Start Temperature||20 Deg F|
|Weight Each||5.00 lbs|
The Howard Lighting PAC0014 is a fluorescent emergency ballast that works with an AC ballast to convert new or existing fluorescent fixtures into emergency lighting. The ballast provides a minimum of 90 minutes of emergency lighting, can be either installed inside, on top or in remote of the fixture. The ballast operates one or two lamps, and is compatible with one- to four-lamp fixtures of many ballast types.
*Provides a minimum of 90 minutes of emergency illumination
*Can be installed inside, on top or in remote of the fixture
*Can be used in both switched and unswitched fixtures
*UL 924 Listed for damp locations
*UL listed for Retrofit/Field Installation
*Life safety NFPA 101
*Mets most state and local codes
*Dual Voltage Input 120V/277 VAC, 60Hz
*Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing.
*6v long life, maintenance-free, rechargeable sealed NiCd battery.
*Internal solid-state transfer switch automatically connects the internal battery to fluorescent lamp(s) for minimum 90-minute emergency illumination.
*Fully automatic solid-state, two rate charger initiates battery charging to recharge a discharged battery in 24 hours.
*Time delay enhancement to overcome end-of-life circuitprotection.
*Painted-white steel housing
*Operates one or two lamps in the emergency mode for a minimum of 90 minutes.
*Provides a maximum initial lumen output of 1400 Lumens
*Compatible with 1-lamp, 2-lamp, 3-lamp and 4-lamp fixtures with many ballast types including standard, rapid-start, slimline, instant-start, dimming and electronic AC ballast -- consult factory regarding specific applications.
*Compatible with many different lamp types -- refer to specs or customer service for more information.