Howard Lighting HFA3E654APSMV000000I HFA3 Series 6 Lamp T5HO Linear Fluorescent High Bay Lighting Fixture

ShineRetrofits Input:

The Howard Lighting HFA3 Series is an energy savings alternative to traditional HID highbay fixtures. The highbay fluorescent operates six lamps that are held in place by quality lamp holders. The fixture uses computer designed reflectors and is compliant with safety and performance standards. And installation is easy thanks to easy access to wiring components and ballast, plus knock-outs for easy electrical wiring and assembly.

Existing HID low (<20 ft) or high (>20 ft) bay fixtures not only use lots of energy compared with today's technological standards, but HID lamps burn out quickly over time and lose their lamp life gradually until they burn out, typically within 2 years.  This leaves you not only with expensive electric bills and maintenance costs, but it leaves your building in the dark as the bulbs lose light output gradually.  Made out of steel and manufactered here in the USA, these full body fixtures will enable you to not only save a lot of energy and reduce your electric bill, but T5 lamps last roughly 5-6 years (at typical yearly operating hours) and maintain 90-95% of their initial light output.  This means that you'll have a bright, maintenance free, energy efficient new lighting system in your facility for over 5 years.  In our experience, your facility will maintain your current light levels if replacing 400W HID fixtures.  We conveniently provide many adders so you may customize your order according to your facility requirements and how the fixtures are currently installed.  Please feel free to give us a call to help you with your individual application!

Benefits of fluorescent high-bay luminaries include:
Energy Saving Compared to HID systems, Exceptional Color Rendering, High System Efficacy, Long Lamp Life Instant On/Re-strike Capability, Howard Ballast and Howard Lamp as a system is covered by Howard Industries Warranty, Quality Lamp holders, Computer Designed Reflectors System Tested, Designed, Approved, and Manufactured by Howard Industries in Mendenhall Mississippi. Compliant with Safety and performance standards.

Product Spec Sheet - Click Here

Applications Include:

Warehouses, Manufacturing Facilities, Retail Stores, Gymnasiums, Cafeterias, Auditoriums

Features:

Easy access to wiring compartment & ballast

Access plate provides access to electrical wiring with-out the need to open the fixture

Knock-outs for easy electrical wiring and assembly

Factory Installed Occupancy Sensor option

Factory Installed Emergency ballast option

Lamp Installation option available

Multiple power cord set options, (voltage, length, gage)

Pendant mount kit provides a top J-box to simplify HID retrofit installations.

Can be used with a hook or rigid conduit and fasteners (Fixture must be specified with “J” option)

Door and lens kit options available

Choice of 86% Standard Specular Aluminum Reflec-tor, 95% Specular Enhanced Aluminum Reflector or 91% White Reflector

Heavy Duty pre-painted steel construction

Factory Installed Wireguard option

Custom configurations available

Can be easily mounted by a single person

Suspended or Pendant mounting insures a quick painless install

Chain and V-Clip Hanging option

Wire cable hanging option.