ShineRetrofits Input:
The Howard Lighting EPH4/32IS/MV/SC/HE electronic fluorescent ballast provides high efficiency light through four lamps, each using 32 watts of power. The ballast uses an instant start and parallel lamp operation, has a 0°F minimum lamp starting temperature for the primary lamp, and a maximum case hot spot temperature of 167°F. It is also UL and cUL listed, meets ANSI standards, and comes with a five-year warranty.
Ballast Specifications
*Ballast shall have a five-year warranty
*Ballast shall be UL & cUL
*Ballast shall be sound rated Class A
*Ballast shall be Class P Type 1 Outdoor
*Ballast shall have a Lamp Current Crest Factor of <1.7
*Ballast shall withstand line transients as specified in ANSI C62.41-2002 & C82.11-2002
*Ballast shall comply with the limits of FCC Part 18 Class A
*Ballast shall have a lamp operating frequency greater than 40kHz
*Ballast shall have a 0°F/18°C minimum lamp starting temperature for primary lamp
*Ballast shall be Instant Start
*Ballast shall be Parallel Lamp Operation
*Ballast shall have minimum Power Factor of 98% for primary Lamp operation
*Ballast shall operate within +/- 10% of the ballast specified line voltage at 60 Hz
*Ballast shall have a maximum case hot spot temperature of 167°F/75°C