Howard Lighting BAL700TD 2 Lamp Emergency Ballast 600-700 Lumen
PART# BAL700TD
Web Price
Please call 1-800-983-1315 for the lowest available price-
Lumen:700lm
-
UPC | 799385-08479 |
---|---|
Certifications | NEC, NFPA, OSHA, UL Listed |
Dimmable | No |
Dimensions | 9.4"L x 2.4"W x 1.5"H |
Length | 9.4" |
Width | 2.4" |
Height | 1.5" |
Lumen Output: | 700 |
Manufacturer | Howard Lighting |
Product Warranty | 5 Year |
Part Number | BAL700TD |
Minimum Start Temperature | 0 Deg F |
Technology | Emergency Ballast |
Voltage | Multivolt 120V-277V |
Weight Each | 2.10" |
ShineRetrofits Input:
The Howard Lighting BAL700TD fluorescent emergency ballast works with an AC ballast to convert new or existing fluorescent fixtures into emergency lighting. The ballast provides at least 90 minutes of emergency lighting, and is compatible with 1-lamp, 2-lamp, 3-lamp or 4-lamp fixtures with a variety of different ballasts. It features a solid-state charger circuit, test switch/power indicator light, and is UL Listed for Retrofit/Field installation.
Features
*Provides a minimum of 90 minutes of emergency illumination
*Can be installed inside, on top or in remote of the fixture
*Can be used in both switched and unswitched fixtures
*UL 924 Listed for damp location
*UL listed for Retrofit/Field Installation
*Life safety NFPA 101
*NEC/OSHA
*Meets most state and local codes
Electrical
*Dual Voltage Input 120V/277 VAC, 60Hz
*Solid-state charger circuit
*Test Switch/Power Indicator light
*Temperature Rating (Ambient): 0ºC to 50ºC [32ºF to 122ºF]
*Maintenance-free, long life, Sealed Nickel Cadmium Battery
*Maximum battery recharge time: 24 hours
Housing
*Painted-white steel housing
Illumination
*Operates one or two lamps in the emergency mode for a minimum of 90 minutes
*Provides a maximum initial lumen output of700 Lumens
Lamp Compatibility
*Compatible with 1-lamp, 2-lamp, 3-lamp and 4-lamp fixtures with many ballast types including standard, rapid start, slimline, instant start, dimming and electronic AC ballast – consult factory regarding specific applications
*Compatible with many different lamp types – refer to specs or contact customer service for
more information
ShineRetrofits Input:
The Howard Lighting BAL700TD fluorescent emergency ballast works with an AC ballast to convert new or existing fluorescent fixtures into emergency lighting. The ballast provides at least 90 minutes of emergency lighting, and is compatible with 1-lamp, 2-lamp, 3-lamp or 4-lamp fixtures with a variety of different ballasts. It features a solid-state charger circuit, test switch/power indicator light, and is UL Listed for Retrofit/Field installation.
Features
*Provides a minimum of 90 minutes of emergency illumination
*Can be installed inside, on top or in remote of the fixture
*Can be used in both switched and unswitched fixtures
*UL 924 Listed for damp location
*UL listed for Retrofit/Field Installation
*Life safety NFPA 101
*NEC/OSHA
*Meets most state and local codes
Electrical
*Dual Voltage Input 120V/277 VAC, 60Hz
*Solid-state charger circuit
*Test Switch/Power Indicator light
*Temperature Rating (Ambient): 0ºC to 50ºC [32ºF to 122ºF]
*Maintenance-free, long life, Sealed Nickel Cadmium Battery
*Maximum battery recharge time: 24 hours
Housing
*Painted-white steel housing
Illumination
*Operates one or two lamps in the emergency mode for a minimum of 90 minutes
*Provides a maximum initial lumen output of700 Lumens
Lamp Compatibility
*Compatible with 1-lamp, 2-lamp, 3-lamp and 4-lamp fixtures with many ballast types including standard, rapid start, slimline, instant start, dimming and electronic AC ballast – consult factory regarding specific applications
*Compatible with many different lamp types – refer to specs or contact customer service for
more information