CREE SEC-EDG Edge Series Wall Pack Security Light Fixture (Product Configurator)

PART#
SEC-EDG
Web Price
Please call 1-800-983-1315 for the lowest available price
Special Price $465.00 Regular Price $696.88
  • Lumen:
    101 LPW - Up to 13,137 Lumens (Please see spec sheet)lm
  • cree
Available in increments of 1
Ordering more than 10? Request a quote and we’ll back to you with our lowest price.
Shine Recommended
Color Temperature:
5700K
More Information
Ballast Factor 1.00
Certifications ANSI, CUL Listed, Dark Sky Compliant, DLC Approved, FCC Compliant, IP65 / IP66 / IP67, Made in America, UL Listed
Color Temp 5700K
Dimmable No
CRI 70
Dimensions Length varies based on selection
Length Varies based on selection (Please see spec sheet)
Width 18.30"
Height 4.10"
Lumen Output: 101 LPW - Up to 13,137 Lumens (Please see spec sheet)
Manufacturer CREE
Product Warranty 10 Year
Part Number SEC-EDG Full Series
Technology LED - New Fixture
Voltage Multivolt 120V-277V

ShineRetrofits Input:
CREE's Security Edge series wall pack fixtures delivers exceptional efficiency and durability made with rugged die cast aluminum and weathertight LED driver compartments.  Featuring a slim, low profile design and aluminum housing, the SEC-EDG series includes a lightweight mounting box for installation and can be used as an uplight or downlight.  Please check the spec sheet for more details and customize the fixture with the options above to best fit your security lighting needs. 

Construction & Materials:
• Slim, low profile design
• Luminaire sides are rugged die cast aluminum with integral, weathertight LED driver compartment and high performance aluminum heat sinks specifically designed for LED applications
• Housing is rugged aluminum
• Furnished with low copper, light weight mounting box designed for installation over standard and mud ring single gang J-Boxes
• Luminaire can also be direct mounted to a wall and surface wired
• Secures to wall with four 3/16" (5mm) screws (by others)
• Conduit entry from top, bottom, sides, and rear
• Allows mounting for uplight or downlight
• Designed and approved for easy through-wiring
• Includes leaf/debris guard
• Exclusive Colorfast DeltaGuard® finish features an E-Coat epoxy primer with an ultradurable powder topcoat, providing excellent resistance to corrosion, ultraviolet
degradation and abrasion. Black, bronze, silver and white are available 
• Weight: See Dimensions and Weight Chart on page 1

Electrical System:
• Input Voltage: 120–277V or 347–480V, 50/60Hz, Class 1 drivers
• Power Factor: > 0.9 at full load
• Total Harmonic Distortion: < 20% at full load
• Integral weathertight J-Box with leads (wire nuts) for easy power hook up
• Integral 10kV surge suppression protection standard
• To address inrush current, slow blow fuse or type C/D breaker should be used
• Maximum 10V Source Current: 20 LED (350mA): 10mA; 20LED (525 & 700 mA) and 40-120 LED: 0.15mA

Regulatory & Voluntary Qualifications:
• cULus Listed
• Suitable for wet locations
• Meets FCC Part 15 standards for conducted and radiated emissions
• Enclosure rated IP66 per IEC 60529 when ordered without P, PML or ML options
• 10kV surge suppression protection tested in accordance with IEEE/ANSI C62.41.2
• Luminaire and finish endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 117
• DLC qualified. Exceptions apply when ordered with full backlight control. Please refer to www.designlights.org/QPL for most current information
• Dark Sky Friendly, IDA Approved. Please refer to www.darksky.org/ for most current information
• Meets Buy American requirements within ARRA

Write Your Own Review
You're reviewing:CREE SEC-EDG Edge Series Wall Pack Security Light Fixture (Product Configurator)
Your Rating
  • 10 Year Warranty
  • Dark Sky Compliant
  • DLC Approved
  • IP65 / IP66 / IP67
  • Made In America Compliant
  • UL Listed

© 2017 ShineRetrofits.com. All Rights Reserved. Your source for induction lights, LED, and fluorescent fixtures and retrofit kits.