CREE FLD-EHO LED High Output Outdoor Flood Light Fixture Horizontal Vertical Tenon Mount (Product Configurator)

Web Price
Please call 1-800-983-1315 for the lowest available price
  • Lumen:
    Up to 76,123 based on ordering selection (Please see spec sheet)lm
  • cree
Available in increments of 1
Ordering more than 10? Request a quote and we’ll back to you with our lowest price.
Shine Recommended
Color Temperature:
More Information
Type of Area Industrial & Warehouse, Landscape & Flood, Large Retail & Open Areas, Pole / Street / Parking Lot
Ballast Factor 1.00
Certifications ANSI, CUL Listed, Dark Sky Compliant, DLC Approved, FCC Compliant, Made in America, ROHS, UL Listed
Color Temp 5700K
Dimmable No
CRI 70
Dimensions 43.80" x 16.50" (120 LEDs) and 30.00" (240 LEDs) x 5.0"
Length 43.80"
Width 16.50" (120 LEDs) and 30.00" (240 LEDs)
Height 5.0"
Lumen Output: Up to 76,123 based on ordering selection (Please see spec sheet)
Manufacturer CREE
Product Warranty 10 Year
Part Number FLD-EHO
Technology LED - New Fixture
Voltage Multivolt 120V-277V
Weight Each 120 LEDs: 45.3 lbs 240 LEDs: 80.5 lbs

ShineRetrofits Input:
CREE's FLD-EHO High Output Flood Light fixture delivers the highest performance standards while decreasing energy costs and reducing maintenance with a variety of fixture options available to customize your lighting needs.  The FLD-EHO series delivers up to 76,000 lumens and delivers 91 lumes per watt with DLC Qualification, high color quality, and a ten year warranty.  Features a slim, low profile design and durable aluminum housing ideal for car dealerships, parking lots, high-mast and general site lighting applications.

Cree TrueWhite® Technology:
A revolutionary way to generate high-quality white light, Cree TrueWhite® Technology is a patented approach that delivers an exclusive combination of 90+ CRI, beautiful light characteristics and lifelong color consistency, all while maintaining high luminous efficacy – a true no compromise solution.

Construction & Materials:
• Slim, low profile, minimizing wind load
• Luminaire sides are rugged die cast aluminum with integral, weathertight LED driver compartments and high performance heat sinks
• Adjustable arm that mounts to a horizontal or vertical 2" (51mm) IP, 2.375-2.50" (60-64mm) O.D. steel tenon. Tenon length must be a minimum of 3.75" (95mm)
• Surface-mount directly to a vertical or horizontal surface with direct mount bracket (refer to Tenons and Brackets table on page 12)
• Luminaire may be field adjusted for use in uplight position. Please refer to installation instructions for details
• Extruded aluminum adjustable mounting shaft
• Luminaire is adjustable from horizontal 90˚ towards pole and 120˚ away from pole
• Exclusive Colorfast DeltaGuard® finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. Silver, bronze, black, and white are available
• Weight: See weight charts on pages 1 and 13

Electrical System:
• Input Voltage: 120-277V or 347-480V, 50/60Hz, Class 1 drivers
• Power Factor: > 0.9 at full load
• Total Harmonic Distortion: < 20% at full load
• Integral 10kV surge suppression protection standard
• To address inrush current, slow blow fuse or type C/D breaker should be used
• Maximum 10V Source Current: 120 LED: 0.40mA; 240 LED: 0.80mA

Regulatory & Voluntary Qualifications:
• cULus Listed
• Suitable for wet locations
• Consult factory for CE Certified products
• 10kV surge suppression protection tested in accordance with IEEE/ANSI C62.41.2
• Meets FCC Part 15, Subpart B, Class A standards for conducted and radiated emissions
• Certified to ANSI C136.31-2001, 3G bridge and overpass vibration standards
• DLC qualified. Exceptions apply when ordered with backlight control, 5000K CCT with 1000mA drive current, or 5000K CCT with 700mA drive current and 2M, 3M or 70 optics. Please refer to for most current information
• Luminaire and finish endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 117
• Meets Buy American requirements within ARRA
• Dark Sky Friendly, IDA Approved. Please refer to for most current information
• RoHS compliant. Consult factory for additional details

Write Your Own Review
You're reviewing:CREE FLD-EHO LED High Output Outdoor Flood Light Fixture Horizontal Vertical Tenon Mount (Product Configurator)
Your Rating
  • 10 Year Warranty
  • Dark Sky Compliant
  • DLC Approved
  • Made In America Compliant
  • ROHS
  • UL Listed

© 2017 All Rights Reserved. Your source for induction lights, LED, and fluorescent fixtures and retrofit kits.