CREE FLD-EDG LED Edge Series Outdoor Square Flood Light Fixture
PART# FLD-EDG
Web Price
Please call 1-800-983-1315 for the lowest available price
- Lumen:Up to 25,474 based on ordering selection (Please see spec sheet)lm
-
| Type of Area | Industrial & Warehouse, Landscape & Flood, Large Retail & Open Areas, Pole / Street / Parking Lot |
|---|---|
| Ballast Factor | 1.00 |
| Certifications | ANSI, CUL Listed, DLC Approved, FCC Compliant, IP65 / IP66 / IP67, Made in America, UL Listed |
| Color Temp | 5700K |
| Dimmable | No |
| CRI | 70 |
| Dimensions | Please See Spec Sheet |
| Length | Please See Spec Sheet for varying lengths |
| Width | 27.10" |
| Height | 3.90" |
| Lumen Output: | Up to 25,474 based on ordering selection (Please see spec sheet) |
| Manufacturer | CREE |
| Product Warranty | 10 Year |
| Part Number | FLD-EDG Series |
| Technology | LED - New Fixture |
| Voltage | Multivolt 120V-277V |
| Weight Each | 21-41 lbs (Please See Spec Sheet) |
ShineRetrofits Input:
CREE's FLD-EDG Square Flood Light fixture delivers high energy savings and reduced maintenance compared with the metal halide fixtures it replaces. The FLD-EDG series delivers up to 25,500 lumens and delivers 109 lumens per watt with DLC Qualification, high color quality, and a ten-year warranty. Features a slim, low-profile design and durable aluminum housing ideal for open space applications, pathways, large common spaces, and parking lots. Customize your fixtures with the options above and reference the specification sheet for more details.
Construction & Materials:
• Slim, low profile, minimizing wind load requirements
• Luminaire sides are rugged die cast aluminum with integral, weathertight LED driver compartment and high performance heat sinks
• DA and DL mount utilizes convenient interlocking mounting method. Mounting is rugged die cast aluminum, mounts to 3-6" (76-152mm) square or round pole and secures to pole with 5/16-18 UNC bolts spaced on 2" (51mm) centers
• AA and SA mounts are rugged die cast aluminum and mount to 2" (51mm) IP, 2.375" (60mm) O.D. tenons
• Includes leaf/debris guard
• Exclusive Colorfast DeltaGuard® finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation, and abrasion. Black, bronze, silver, and white are available
• Weight: See Dimensions and Weight Charts on pages 1 and 22
Electrical System:
• Input Voltage: 120-277V or 347-480V, 50/60Hz, Class 1 drivers
• Power Factor: > 0.9 at full load
• Total Harmonic Distortion: < 20% at full load
• DA and DL mounts designed with integral weathertight electrical boxes with terminal strips (12Ga–20Ga) for easy power hookup
• Integral 10kV surge suppression protection standard
• To address inrush current, a slow blow fuse or type C/D breaker should be used
• Maximium 10V Source Current: 20 LED (350mA): 10mA; 20 LED (525 & 700mA) and 40-80 LED: 0.15mA; 100-160 LED: 0.30mA
Regulatory & Voluntary Qualifications:
• cULus Listed
• Suitable for wet locations
• Enclosure rated IP66 per IEC 60529 when ordered without P or R options
• Consult factory for CE Certified products
• Certified to ANSI C136.31-2001, 3G bridge, and overpass vibration standards when ordered with AA, DA, and DL mounts
• 10kV surge suppression protection tested in accordance with IEEE/ANSI C62.41.2
• Meets FCC Part 15 standards for conducted and radiated emissions
• Luminaire and finish endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 117
• DLC qualified. Exceptions apply when ordered with full backlight control or 3MP optic with 20 LEDs. Please refer to www.designlights.org/QPL for most current information
• Meets Buy American requirements within ARRA
ShineRetrofits Input:
CREE's FLD-EDG Square Flood Light fixture delivers high energy savings and reduced maintenance compared with the metal halide fixtures it replaces. The FLD-EDG series delivers up to 25,500 lumens and delivers 109 lumens per watt with DLC Qualification, high color quality, and a ten-year warranty. Features a slim, low-profile design and durable aluminum housing ideal for open space applications, pathways, large common spaces, and parking lots. Customize your fixtures with the options above and reference the specification sheet for more details.
Construction & Materials:
• Slim, low profile, minimizing wind load requirements
• Luminaire sides are rugged die cast aluminum with integral, weathertight LED driver compartment and high performance heat sinks
• DA and DL mount utilizes convenient interlocking mounting method. Mounting is rugged die cast aluminum, mounts to 3-6" (76-152mm) square or round pole and secures to pole with 5/16-18 UNC bolts spaced on 2" (51mm) centers
• AA and SA mounts are rugged die cast aluminum and mount to 2" (51mm) IP, 2.375" (60mm) O.D. tenons
• Includes leaf/debris guard
• Exclusive Colorfast DeltaGuard® finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation, and abrasion. Black, bronze, silver, and white are available
• Weight: See Dimensions and Weight Charts on pages 1 and 22
Electrical System:
• Input Voltage: 120-277V or 347-480V, 50/60Hz, Class 1 drivers
• Power Factor: > 0.9 at full load
• Total Harmonic Distortion: < 20% at full load
• DA and DL mounts designed with integral weathertight electrical boxes with terminal strips (12Ga–20Ga) for easy power hookup
• Integral 10kV surge suppression protection standard
• To address inrush current, a slow blow fuse or type C/D breaker should be used
• Maximium 10V Source Current: 20 LED (350mA): 10mA; 20 LED (525 & 700mA) and 40-80 LED: 0.15mA; 100-160 LED: 0.30mA
Regulatory & Voluntary Qualifications:
• cULus Listed
• Suitable for wet locations
• Enclosure rated IP66 per IEC 60529 when ordered without P or R options
• Consult factory for CE Certified products
• Certified to ANSI C136.31-2001, 3G bridge, and overpass vibration standards when ordered with AA, DA, and DL mounts
• 10kV surge suppression protection tested in accordance with IEEE/ANSI C62.41.2
• Meets FCC Part 15 standards for conducted and radiated emissions
• Luminaire and finish endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 117
• DLC qualified. Exceptions apply when ordered with full backlight control or 3MP optic with 20 LEDs. Please refer to www.designlights.org/QPL for most current information
• Meets Buy American requirements within ARRA
