CREE CPY250 Series - Version B Outdoor LED Canopy Soffit Light Fixture (Product Configurator)

Web Price
Please call 1-800-983-1315 for the lowest available price
  • Lumen:
    4,210-20,080 Lumens (Please See Spec Sheet)lm
  • cree
Available in increments of 1
Ordering more than 10? Request a quote and we’ll back to you with our lowest price.
Shine Recommended
Color Temperature:
More Information
Mounting Height 19 - 22 Feet
Type of Area Gas Station & Convenience Store, Large Retail & Open Areas
Ballast Factor 1.00
Certifications ANSI, CUL Listed, Dark Sky Compliant, DLC Approved, IP65 / IP66 / IP67, Made in America, ROHS, UL Listed
Color Temp 5700K
Dimmable No
Lamp Life: 50,000 hours
CRI 70
Dimensions 15.00" x 15.00"
Length 15.00"
Width 15.00"
Lumen Output: 4,210-20,080 Lumens (Please See Spec Sheet)
Manufacturer CREE
Product Warranty 10 Year
Part Number CPY250
Minimum Start Temperature -20 Deg F
Technology LED
Voltage Multivolt 120V-277V
Weight Each 12.5 lbs

ShineRetrofits Input: 

CREE's CPY250 LED Canopy and Soffit Light fixture series was designed with a low profile and delivers excellent performance while lowering energy and operating costs.  The CPY250 is the ideal energy saving solution to metal halide fixtures and is the ideal solution for gas stations and petroleum applications.  Delivers 4,400-20.784 lumens depending on the ordering selection above (see spec sheet for more details). Includes a ten year warranty!

Construction & Materials:  

• Slim, low profile design
• Easy mounting and servicing from below the deck
• Luminaire housing is constructed of rugged cast aluminum with integral heat sink specifically designed for LED
• Flat lens is 0.125" tempered Solite® glass
• Drop lens is 0.157" molded borosilicate glass
• Direct mount is suitable for use in single or double skin canopies with a minimum 4.0" (102mm) wide panels and a minimum 22 gauge, 0.030" (0.7mm) canopy thickness
• Direct mount luminaire mounts directly to the canopy deck with the drilling of a single 2" to 4" (51mm to 102mm) round hole, is secured in place with self-sealing screws that provide a weathertight seal and includes 3/4” (19mm) conduit entry for direct wire feed 
• Pendant mount includes J-Box for customer wiring and is intended to be mounted by 3/4 IP pendant (by others)
• Exclusive Colorfast DeltaGuard® finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. Black, bronze, silver and white are available
Weight: 12.5 lbs. (5.7kg) 

Electrical System:

Input Voltage: 120-277V or 347-480V (A, B, D, & E Input Power Designators only), 50/60Hz, Class 1 drivers
Power Factor: > 0.9 at full load
Total Harmonic Distortion: < 20% at full load
• Integral 6kV surge suppression protection standard
• To address inrush current, slow blow fuse or type C/D breaker should be used
• 10V Source Current: 0.15mA

Regulatory & Voluntary Qualifications:

• cULus Listed
• Suitable for wet locations when ordered with DM mount
• Suitable for damp locations when ordered with PD mount
• Enclosure rated IP66 per IEC 60529 when ordered with DM mount
• Consult factory for CE Certified products
• 6kV surge suppression protection tested in accordance with IEEE/ANSI C62.41.2
• Meets FCC Part 15, Subpart B, Class A standards for conducted and radiated emissions
• DLC and DLC Premium qualified versions available. Please refer to for most current information
• Luminaire and finish endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 117
• Meets Buy American requirements within ARRA
• RoHS compliant. Consult factory for additional details
• Class I, Division II Hazardous Location rated when ordered with the DM mount. Not available with the following options: DIM, ML, PML. Consult factory for additional details

Write Your Own Review
You're reviewing:CREE CPY250 Series - Version B Outdoor LED Canopy Soffit Light Fixture (Product Configurator)
Your Rating
  • 10 Year Warranty
  • Dark Sky Compliant
  • DLC Approved
  • IP65 / IP66 / IP67
  • Made In America Compliant
  • ROHS
  • UL Listed

© 2017 All Rights Reserved. Your source for induction lights, LED, and fluorescent fixtures and retrofit kits.