CREE C6-120V-LSA 6" Hard Wire Recessed Pan Conversion Kit for LR6 CR6 Series LED Downlight 120V GU24
PART# C6-120V-LSA
Web Price
Please call 1-800-983-1315 for the lowest available price
| UPC | 810048024483 |
|---|---|
| Certifications | UL Listed |
| Dimmable | No |
| Lamps Included | No |
| Dimensions | 15.00" x 7.75" |
| Length | 15.00" |
| Width | 7.75" |
| Manufacturer | CREE |
| Part Number | C6-120V-LSA |
| Weight Each | 3.00 lbs |
ShineRetrofits Input:
The C6-120V-LSA six inch hard wire conversion kit can be used to convert pan type recessed downlight housings for the LR6 and CR6 with a 120V connector and GU24 base only. This kit will help in making energy code compliance easier. Optional 8 inch GR8 adapter ring sold separately.
Product Specifications:
Construction & Materials:
• Rugged one-piece housing
• Hard-wire connector assembly complete with strain relief
• Integral mounting clips adjust to accommodate various apertures
• GU24 base for 120 Volt input or 277V Connector for 277 Volt input
• Suitable for insulated or non-insulated ceilings
Regulatory & Volunatry Qualifications:
• cULus Listed
• Suitable for damp locations.
Compatible Housings:
• Designed to fit housings with apertures from 6.25” to 6.75”.
• GR8 adapter ring accommodates housings with apertures up to 8.5” in diameter.
Installation:
• Disconnect Power
• Remove existing lamp, trim, and ballast (if required).
• Hard wire into existing junction box.
• Push assembly through ceiling opening until the mounting clips engage.
• Adjust mounting clips as needed.
• Install Cree six-inch downlight.
NOTE: Reference www.cree.com/lighting for detailed installation instructions.
ShineRetrofits Input:
The C6-120V-LSA six inch hard wire conversion kit can be used to convert pan type recessed downlight housings for the LR6 and CR6 with a 120V connector and GU24 base only. This kit will help in making energy code compliance easier. Optional 8 inch GR8 adapter ring sold separately.
Product Specifications:
Construction & Materials:
• Rugged one-piece housing
• Hard-wire connector assembly complete with strain relief
• Integral mounting clips adjust to accommodate various apertures
• GU24 base for 120 Volt input or 277V Connector for 277 Volt input
• Suitable for insulated or non-insulated ceilings
Regulatory & Volunatry Qualifications:
• cULus Listed
• Suitable for damp locations.
Compatible Housings:
• Designed to fit housings with apertures from 6.25” to 6.75”.
• GR8 adapter ring accommodates housings with apertures up to 8.5” in diameter.
Installation:
• Disconnect Power
• Remove existing lamp, trim, and ballast (if required).
• Hard wire into existing junction box.
• Push assembly through ceiling opening until the mounting clips engage.
• Adjust mounting clips as needed.
• Install Cree six-inch downlight.
NOTE: Reference www.cree.com/lighting for detailed installation instructions.
