CREE BXSP2-C-HT 139 Watt LED Street Light Fixture with Horizontal Tenon Mount Double Module

ShineRetrofits Input: 
CREE's 139 watt XSP Double Module LED Street light provides increased energy savings with DLC qualification and uses CREE's NanoOptic Precision Delivery Grid optic for better optical control.  This high performing street light is ideal for any street or roadway application boasting over 50,000 lifetime hours and a ten year warranty.  Specifications vary based on ordering selection.  Please refer to the spec sheet for lumen output and other specifications.

Performance Summary: 
• NanoOptic® Precision Delivery Grid™ optic
• Made in the U.S.A. of U.S. and imported parts
• CRI: Minimum 70 CRI
• CCT: 4000K (+/- 300K), 5700K (+/- 500K)
• Limited Warranty†: 10 years on luminaire/10 years on Colorfast DeltaGuard® finish

Product Specifications:

Construction & Materials:
• Die cast aluminum housing 
• Tool-less entry
• Mounts on 1.25" IP, 1.66" (42mm) O.D. or 2" IP, 2.375" (60mm) O.D. horizontal tenon (minimum 8" [203mm] in length) and is adjustable 
+ /- 5˚ to allow for fixture leveling
• Exclusive Colorfast DeltaGuard® finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. Black, bronze, and silver are available
• Luminaire secured with two mounting bolts standard
• Designed with 0-10V dimming capabilities.  Controls by others 

Electrical System: 
• Input Voltage: 120–277V, 50 / 60Hz
• Class 1 driver
• Power Factor: > 0.9 at full load
• Total Harmonic Distortion: < 20% at full load
• Integral 10kV surge suppression protection standard
• To address inrush current, slow blow fuse or type C / D breaker should be used
• 10V Source Current: 0.15mA 

Regulatory & Voluntary Qualifications:
• cULus Listed
• Suitable for wet locations
• Certified certification to ANSI C136.31-2001, 3G bridge and overpass vibration standards
• Meets CALTrans 611 Vibration testing
• 10kV surge suppression protection tested in accordance with IEEE / ANSI C62.41.2
• Meets FCC Part 15, Subpart B, Class A standards for conducted and radiated emissions
• Luminaire and finish endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 117
• Meets Buy American requirements within ARRA
• RoHS compliant. Consult factory for additional details
• DLC Qualified. Exceptions apply when N or Q9 (select adjustments) options are ordered. Please refer to www.designlights.org/QPL for most current information
• Dark Sky Friendly, IDA Approved. Please refer to www.darksky.org for most current information

XSP Series LED Street Light Installation Video: