CREE CPY500 Series CP5 Outdoor LED Gas Station Canopy Direct Mount Light Fixture Replaces 400W HID
PART# CP5
Web Price
Please call 1-800-983-1315 for the lowest available price- Lumen:2,000 - 20,000lm
- Replacement Equiv:400 Watt HID Incandescent light bulb
HID Equivalent | 400 Watt HID |
---|---|
Mounting Height | 19 - 22 Feet |
Type of Area | Gas Station & Convenience Store, Large Retail & Open Areas, Pole / Street / Parking Lot |
Certifications | ANSI, CUL Listed, Dark Sky Compliant, DLC Premium, IP65 / IP66 / IP67, Made in America, ROHS, UL Listed |
Dimmable | No |
Lamp Life: | 100,000 Hours |
CRI | >70 |
Dimensions | 11.6" x 11.6" |
Length | 11.6" |
Width | 11.6" |
Lumen Output: | 2,000 - 20,000 |
Manufacturer | CREE |
Product Warranty | 10 Year |
Part Number | CP5-2L | CP5-4L | CP5-8L | CP5-13L | CP5-20L |
Minimum Start Temperature | -40 Deg F |
Technology | LED - New Fixture |
Voltage | Multivolt 120V-277V |
Weight Each | 6.6 lbs |
Total Harmonic Distortion [THD] | < 20% |
Power Factor | > 0.9 |
ShineRetrofits Input:
This CPY500 Series shows off premium aesthetic lighting solutions for petroleum canopies and CNG fueling stations. The 11"x11" glass diffused optics with minimal glare increases visual comfort while delivering high-quality light distribution. It is easy to install with its lightweight and low-profile design and smooth lighting edges, suitable for both retrofit and new construction applications. Delivers 2,000 to 20,000 lumens depending on the ordering selection above (see spec sheet for more details). Includes a ten-year warranty!
CONSTRUCTION & MATERIALS
• Slim, low profile light engine that mounts to bottom of canopy
• Light engine is constructed of rugged cast aluminum with integral heat sink specifically designed for LED
• Large uniform light panel features 0.157" molded borosilicate glass lens w/ side sparkle
• Optional bezel trim accessories provide optical glare control and shielding for light trespass
• Angled extruded aluminum driver housing to fit under existing structures
• Light engine and driver can be installed independently in 90-degree increments for flexibility in installation
• All electronics are accessible from below canopy
• 2' TC-ER rated 600V, 18/5 cable exits luminaire
• Includes Heyco M3231 fitting and locknut to connect to electrical supply
• Includes wire form hanger and quick connects between light engine and driver compartment for ease of installation
• Corrosion-resistant and captive screws
• Exclusive Colorfast DeltaGuard® finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. Black, bronze, silver and white are available
• Weight: Light Engine - 6.6 lbs. (3.0kg); 2L/4L/ 8L Driver Compartment - 3.8 lbs. (1.7kg); 13L Driver Compartment - 4.2 lbs. (1.9kg); 20L Driver Compartment - 5.4 lbs. (2.4kg)
ELECTRICAL SYSTEM
• Input Voltage: 120-277V or 347-480V, 50/60Hz
• Power Factor: > 0.9 at full load
• Total Harmonic Distortion: < 20% at full load
• Integral 6kV/3kA surge suppression protection standard; 10kV/5kA optional
• When code dictates fusing, a slow blow fuse or type C/D breaker should be used to address inrush current
CONTROLS
• Continuous dimming to 10% with 0-10V DC control protocol
• 10V Source Current: 2L-8L: 0.15mA; 13L: 1mA; 20L: 0.15mA
• Use only lighting controls with neutral connection or controls intended for use with LED fixtures
• Reference LED Dimming spec sheet for additional dimming information
REGULATORY & VOLUNTARY QUALIFICATIONS
• cULus Listed
• Suitable for wet locations. Covered ceiling required only when not used with cULus Listed, wet location junction box or CP5-JBOX accessory
• Both driver compartment and light engine enclosures meet IP66 requirements per IEC 60529. The installed system meets IP65 requirements per IEC 60529
• ANSI C136.2 6kV/3kA (standard) and 10kV/5kA (optional) surge protection, tested in accordance with IEEE/ANSI C62.41.2
• Meets FCC Part 15, Subpart B, Class A limits for conducted and radiated emissions
• Luminaire and finish endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 117
• Assembled in the USA by Cree Lighting from US and imported parts
• Meets Buy American requirements within ARRA
• RoHS compliant. Consult factory for additional details
• Class I, Division 2 Hazardous Location rated when ordered with HZ option. Rated for Groups A, B, C & D. Bears a T4A, (120˚C) temperature classification within a 40˚C ambient
• Dark Sky Friendly, IDA Approved when ordered with 30K8 CCT and cut-off bezel. Please refer to https://www.darksky.org/our-work/lighting/lighting-forindustry/fsa/fsa-products/ for most current information
• DLC Premium qualified when ordered with 8L, 13L and 20L with UL voltage. Please refer to https://qpl.designlights.org/solid-state-lighting for most current information
• CA RESIDENTS WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov
ShineRetrofits Input:
This CPY500 Series shows off premium aesthetic lighting solutions for petroleum canopies and CNG fueling stations. The 11"x11" glass diffused optics with minimal glare increases visual comfort while delivering high-quality light distribution. It is easy to install with its lightweight and low-profile design and smooth lighting edges, suitable for both retrofit and new construction applications. Delivers 2,000 to 20,000 lumens depending on the ordering selection above (see spec sheet for more details). Includes a ten-year warranty!
CONSTRUCTION & MATERIALS
• Slim, low profile light engine that mounts to bottom of canopy
• Light engine is constructed of rugged cast aluminum with integral heat sink specifically designed for LED
• Large uniform light panel features 0.157" molded borosilicate glass lens w/ side sparkle
• Optional bezel trim accessories provide optical glare control and shielding for light trespass
• Angled extruded aluminum driver housing to fit under existing structures
• Light engine and driver can be installed independently in 90-degree increments for flexibility in installation
• All electronics are accessible from below canopy
• 2' TC-ER rated 600V, 18/5 cable exits luminaire
• Includes Heyco M3231 fitting and locknut to connect to electrical supply
• Includes wire form hanger and quick connects between light engine and driver compartment for ease of installation
• Corrosion-resistant and captive screws
• Exclusive Colorfast DeltaGuard® finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. Black, bronze, silver and white are available
• Weight: Light Engine - 6.6 lbs. (3.0kg); 2L/4L/ 8L Driver Compartment - 3.8 lbs. (1.7kg); 13L Driver Compartment - 4.2 lbs. (1.9kg); 20L Driver Compartment - 5.4 lbs. (2.4kg)
ELECTRICAL SYSTEM
• Input Voltage: 120-277V or 347-480V, 50/60Hz
• Power Factor: > 0.9 at full load
• Total Harmonic Distortion: < 20% at full load
• Integral 6kV/3kA surge suppression protection standard; 10kV/5kA optional
• When code dictates fusing, a slow blow fuse or type C/D breaker should be used to address inrush current
CONTROLS
• Continuous dimming to 10% with 0-10V DC control protocol
• 10V Source Current: 2L-8L: 0.15mA; 13L: 1mA; 20L: 0.15mA
• Use only lighting controls with neutral connection or controls intended for use with LED fixtures
• Reference LED Dimming spec sheet for additional dimming information
REGULATORY & VOLUNTARY QUALIFICATIONS
• cULus Listed
• Suitable for wet locations. Covered ceiling required only when not used with cULus Listed, wet location junction box or CP5-JBOX accessory
• Both driver compartment and light engine enclosures meet IP66 requirements per IEC 60529. The installed system meets IP65 requirements per IEC 60529
• ANSI C136.2 6kV/3kA (standard) and 10kV/5kA (optional) surge protection, tested in accordance with IEEE/ANSI C62.41.2
• Meets FCC Part 15, Subpart B, Class A limits for conducted and radiated emissions
• Luminaire and finish endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 117
• Assembled in the USA by Cree Lighting from US and imported parts
• Meets Buy American requirements within ARRA
• RoHS compliant. Consult factory for additional details
• Class I, Division 2 Hazardous Location rated when ordered with HZ option. Rated for Groups A, B, C & D. Bears a T4A, (120˚C) temperature classification within a 40˚C ambient
• Dark Sky Friendly, IDA Approved when ordered with 30K8 CCT and cut-off bezel. Please refer to https://www.darksky.org/our-work/lighting/lighting-forindustry/fsa/fsa-products/ for most current information
• DLC Premium qualified when ordered with 8L, 13L and 20L with UL voltage. Please refer to https://qpl.designlights.org/solid-state-lighting for most current information
• CA RESIDENTS WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov