Due to global supply chain issues, stock levels can change. Please contact support to verify stock levels. Call 1-800-983-1315

CREE CPY250 Series - Version C Outdoor LED Canopy Soffit Light Fixture Replaces 400W HID

PART# CPY250-C

$425.14
Please call 1-800-983-1315 for the lowest available price
  • Lumen:
    2,000 - 21,000lm
  • Replacement Equiv:
    400 Watt HID Incandescent light bulb
  • CREE Lighting
Available in increments of 1
Ordering more than 10? Request a quote and we’ll back to you with our lowest price.
More Information
HID Equivalent 400 Watt HID
Mounting Height 19 - 22 Feet
Type of Area Gas Station & Convenience Store, Large Retail & Open Areas, Pole / Street / Parking Lot
Ballast Factor 1.00
Certifications ANSI, CUL Listed, Dark Sky Compliant, DLC Approved, IP65 / IP66 / IP67, Made in America, ROHS, UL Listed
Dimmable No
Lamp Life: 100,000 Hours
CRI >70
Dimensions 15.00" x 15.00"
Length 15.00"
Width 15.00"
Lumen Output: 2,000 - 21,000
Manufacturer CREE
Product Warranty 10 Year
Part Number CPY250-C
Minimum Start Temperature -40 Deg F
Technology LED - New Fixture
Voltage Multivolt 120V-277V
Weight Each 12.5 lbs
Total Harmonic Distortion [THD] < 20%
Power Factor > 0.9

ShineRetrofits Input: 
CREE's CPY250-C LED Canopy and Soffit Light fixture series was designed with a low profile and delivers excellent performance while lowering energy and operating costs. The CPY250-C is the ideal energy-saving solution to metal halide fixtures and is the ideal solution for gas stations and petroleum applications. Delivers 2,000-21,000 lumens depending on the ordering selection above (see spec sheet for more details). Includes a ten-year warranty! 

Construction & Materials:  
Slim, low profile design
Easy mounting and servicing from below the deck
Luminaire housing is constructed of rugged cast aluminum with integral heat sink specifically designed for LED
Flat lens is 0.125" tempered Solite® glass
Drop lens is 0.157" molded borosilicate glass
Direct mount is suitable for use in single or double skin canopies with a minimum 4.0" (102mm) wide panels and a minimum 22 gauge, 0.030" (0.7mm) canopy thickness
Direct mount luminaire mounts directly to the canopy deck with the drilling of a single 2" to 4" (51mm to 102mm) round hole, is secured in place with self-sealing screws that provide a weathertight seal and includes 3/4” (19mm) conduit entry for direct wire feed
Hook and cord mount includes a 3' (0.91m) cord out of the luminaire and is intended to hang from the single hook
Standard pendant mount includes a mounting bracket and a J-Box for customer wiring and is intended to be mounted by 3/4 IP pendant (by others)
Hazardous location pendant mount has a threaded hub which accepts 3/4" NPT conduit (by others) and secures with a 1/4"-20 set screw
H6 mount includes cable gland with 3' (0.91m) cord out of the luminaire and is intended to hang from the single hook
Exclusive Colorfast DeltaGuard® finish features an E-Coat epoxy primer with an ultra-durable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. Black, bronze, silver and white are available
Weight: 12.5 lbs. (5.7kg) 

Electrical System:
Input Voltage: 120-277V or 347-480V, 50/60Hz
Power Factor: > 0.9 at full load
Total Harmonic Distortion: < 20% at full load
Integral 6kV/3kA surge suppression protection standard; 10kV/5kA surge suppression protection optional
When code dictates fusing, a slow blow fuse or type C/D breaker should be used to address inrush current

Controls:
10V option provides continuous dimming to 10% with 0-10V DC control protocol
Maximum 10V Source Current: 1mA
Use only lighting controls with neutral connection or controls intended for use with LED fixtures
Reference LED Dimming spec sheet for additional dimming information

Regulatory & Voluntary Qualifications:
cULus Listed
Suitable for wet locations when ordered with DM, DM mount w/HZ option, PD mount w/HZ option, and H6 mounts. Covered ceiling required only when not used with cULus Listed, wet location junction box or XA-BXCCJBOX accessory
Suitable for damp locations when ordered with HC and PD mounts. Designed for indoor use only
Enclosure meets IP66 requirements per IEC 60529 when ordered with DM and H6 mounts
ANSI C136.2 6kV/3kA (standard) and 10kV/5kA (optional) surge protection, tested in accordance with IEEE/ANSI C62.41.2. PML option includes 10kV surge protection
Meets FCC Part 15, Subpart B, Class A limits for conducted and radiated emissions
Luminaire and finish endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 117
Assembled in the USA by Cree Lighting from US and imported parts
Meets Buy American requirements within ARRA
RoHS compliant. Consult factory for additional details
Class I, Division 2 Hazardous Location rated when ordered with the DM or PD mount and the HZ option. Not available with K or PML options. Rated for Groups A, B, C & D. Bears a T3C (160 ̊C) temperature classification within a 25 ̊C ambient
NSF Certified when ordered with DM mount and K option. Not available with HZ or PML options. Refer to http://info.nsf.org/Certified/Food/ for additional details
Dark Sky Friendly, IDA Approved when ordered with 30K CCT and Flat Lens (F). Please refer to https://www.darksky.org/our-work/lighting/lighting-for-industry/fsa/fsa-products/ for most current information
DLC Premium qualified for Fuel Pump Canopies. DLC Standard qualified for High-Bay/Low Bay Luminaires when ordered with 8L and 30K8, 40K9 and 50K9 CCTs, 13L or 21L lumen packages with all CCTs. Please refer to https://qpl.designlights.org/solid-state-lighting for most current information

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
  • 10 Year Warranty
  • 400W HID Equivalent
  • Dark Sky Compliant
  • DLC Approved
  • IP65 / IP66 / IP67
  • Made In America Compliant
  • ROHS
  • UL Listed
© 2023 ShineRetrofits.com. All Rights Reserved. Your source for induction lights, LED, and fluorescent fixtures and retrofit kits.