Please call or email us for more fixture options and adders. The spec sheet is available for download towards the right.
Lamps come installed in this fixture! Choose your desired Kelvin temperature using the radio button option above. AEI Lighting 4-Lamp 227W T5HO Full Aluminum MIRO4 95% Reflective Lighting Fixture. Includes full aluminum enclosed fixture, reflector, brackets, and a high-quality, high ballast factor T5HO Ballast. Great replacement for a 320 watt metal halide.
We are very proud to be the only company on the internet to offer the AEI Lighting line of products! AEI Lighting makes the best fluorescent fixtures in the industry. These fixtures have the highest fixture efficiency (highest light output) and best design of any product out there. Not only are they manufactured in the USA, the fixture is completely aluminum, which means you will have no rust over time. This vented aluminum fixture also allows for the most efficient (vs steel) dissipation of heat to keep the fixture cooler than regular fixtures, allowing for longer lamp and ballast life with cooler operating temperatures. The fixtures are also one of the most sturdiest designed and best looking ones we have seen. These fixtures cost a little bit more than the regular steel fixtures, but we believe the benefits outweigh the incremental price difference by far.
Existing HID low (<20 ft) or high (>20 ft) bay fixtures not only use lots of energy compared with today's technological standards, but HID lamps burn out quickly over time and lose their lamp life gradually until they burn out, typically within 2 years. This leaves you not only with expensive electric bills and maintenance costs, but it leaves your building in the dark as the bulbs lose light output gradually. Made out of aluminum and manufactured here in the USA, these full body fixtures will enable you to not only save a lot of energy and reduce your electric bill, and T5HO lamps last 36,000 hours, or roughly 5-6 years (at typical yearly operating hours.) They also maintain 90-95% of their initial light output. This means that you'll have a bright, maintenance free, energy efficient new lighting system in your facility for years. Please feel free to give us a call to help you with your individual application!
Features and Benefits:
Tool-Free Maintenance - AEI leads the industry
with access to all internal components without the use of tools.
Over 50% Energy Savings Compared to HID -
T5HO lamps and ballasts save more than 50% over older HID
and T12 Fluorescent lighting systems.
Longer Lamp Life For T5HO! T5HO lamps are rated
for up to 35,000 hours, nearly twice that of typical fluorescent
and HID lamps.
95% Lumen Maintenance For T5HO - HID light
levels drop as much as 60% as the lamps age. T5HO light levels
maintain 95% over the life of the lamp.
Instant On...Instant Restrike...No Flicker! T5HO
ballast technology eliminates flicker and provides instant on and
instant restrike while maintaining light levels during dips and peaks.
Cool Operation - Vented aluminum housing construction
provides optimal ballast performance and long life.
CONSTRUCTION: Aluminum Housing standard. Housing is
vented to keep ballast cool in a wide range of operating temperatures.
Optional clear, acrylic lens available.
REFLECTOR DESIGN: Specular Miro4® reflectors standard.
White reflectors are optional. Consult AEI for other reflector options.
ELECTRICAL: 120 or 277V, 75°C programmed start ballasts standard.
Universal voltage or 347, 480V and 90°C ballasts as well as other
options are available upon request. Emergency ballasts available.
MOUNTING: Surface, Chain or Pendant mounting options
available. See our Labor Saving Installation Guide for mounting designs.
Advantages over Metal Halide
• Higher efficiency/energy savings
• Increase light levels while reducing wattage
• Instant on and re-strike
• Multi-Level Switching
• Longer lamp life
• Higher lumen maintenance
• Higher color rendering
• Designed for surface, chain or gripple pendant mount optional
• Fixture body and ends constructed from 22 gauge steel
• Painted metal parts are pre-treated with phosphate bonding process
• Paint is electrostatically applied with high temperature baked white enamel
• Designed for slide on wrap style lens
• Computer designed UL reflector
• Body reinforced for rigidity
• Twist-lock snap in lamp holders
• Custom design options available