4 Foot 2 Lamp 56 Watt Hazardous Location Marine Grade Coast Guard Approved Aluminum LED Rig Light Fixture 120-277V
Web PricePlease call 1-800-983-1315 for the lowest available price
|Type of Area||Hazardous Location|
|Certifications||Title 24 Compliant|
|Number of Lamps||2 Lamp|
|Lamp Life:||50,000 Hours|
|Dimensions||51.1"-L x 7.09"-W x 8.65"-H|
|Product Warranty||5 Year|
|Minimum Start Temperature||-40 Deg F|
|Weight Each||22.20 lbs|
This 56 Watt 4 Foot Hazardous Area LED Light Fixture is an energy efficient solution designed specifically to handle the rigors of wet and corrosive marine environments. It is a high quality LED option that will reduce operating costs, improve lighting quality and reduce maintenance. The light is UL listed Class 1 Division 2 Groups A, B, C and D with a T4A temperature rating and U.S. Coast Guard Approval. Made with non-corrosive materials with copper free aluminum alloy and eight corrosion resistant plastic latches to secure the lamp cover making this light fixture perfect for with oil rigs, ships, offshore applications, petrochemical, manufacturing, chemical storage, and water treatment centers. Extremely Reliable, efficient, and boasts a much longer lamp life compared with fluorescents.
• Luminous Efficiency: 125 Lumens per Watt
• Color Temperature: 5600K, 4500K, 3000K
• Beam Angle: 150°
• Ambient Temp Range: -40°C to +65°C
• Operating Temp Rating: T6 Rated
• Minimum Operating Temp: -40°C
• Maximum Case Temp: +90°C
• Materials: Cast Aluminum End Caps, Aluminum Reflectors - Copper Free
• Lens Material: Hardened Borosilicate Glass Tubes
• Gasket Material: Buna Rubber O-Rings
• Mounting: Back Mount Swivel Bracket
• Wiring: 3/4" Threaded
• Warranty: 5 Years
• Listed for United States and Canada
• Class 1 Division 2, Groups A, B,C, D
• UL 884
• UL 1598A Marine Type (Saltwater)
• Certified to Canadian Standards
• Meets USCG Specifications
• T4 Temperature Rating
• LEL Listed LED Lamps
• Made in the USA
• Silicone Free
Superior LED Benefits:
• 50,000 hour lifespan.
• Can SAVE 50% or more on energy.
• Qualifies retrofit projects for financial incentives, including utility rebates tax credits and energy loan programs
• Reduces energy use and prolongs life-spans of peripheral cooling units (A/C, refrigeration)
• 100% recyclable.
• No toxins-lead, mercury.
• No UV light, infrared radiation or CO2 emissions.
• Qualifies buildings for LEED and other sustainable business certifcations.
• Bright, even light maintains consistent color over time.
• Instant on/off - No flickering, delays or buzzing.
• Very good color rendering
• Vibration/impact resistant.
• Significantly cooler operation.
• Less frequent outages, higher output improves workplace safety.
Unless otherwise specified, our standard, most popular configuration is the back mount swivel bracket. We also offer a
pendant mount for those needing to suspend the fixture away from the ceiling surface (i.e. suspend from pipe or conduit). Additional mounting
configurations can be customized to meet the requirements on the application. Please contact us for special mounting configurations. A sliding
bracket mount is available so operators can retrofit this LED light fixture to use the per-existing mounting holes from other fluorescent fixtures.
Below, in the related items area you can order the sliding mount bracket option.
Adjustable Surface Mount Brackets:
Each bracket is cinched to the bracket mounting peg on each side of the light. The angle of the bracket is
set by tightening two cap screws on either side of the bracket. The cap screws act as a set screw. The bracket itself is mounted via a single bolt
hole at the top the bracket. There are two brackets, one on each end of the light. Once the brackets are mounted to a surface (ceiling, floor or
wall), the light fixture can be removed from the brackets by loosening the cap screws that hold the bracket to the mounting peg.
Pendant mount fixtures hang from the ceiling and are suspended by rigid pipe. Each fixture is equipped with two 3/4”
NPT hubs, one on each end of the fixture. Operators bring rigid pipe down to the threaded mounting hubs. Wiring is fed down through the rigid
pipe to one of the NPT hubs and tied in to the fixture’s lead wires, completing the electrical connection. The remaining pendant hub provides
support for the opposite end of the fixture.