200" High Bay Lighting Fixture Loop & Paddle Aircraft Gripple Cable Hanging Kit. Easily hang your light fixtures with this adjustable 1/16 galvanized aircraft cable. Includes Y-Paddle assembly and a quick locking device to change the height of the cable with no pins or tools. Hang up to 75 lbs per cable or 150 lbs per kit. Package contains 2 cable sets, one for each end of the fixture.
These kits are the most well constructed and fastest way to hang lighting fixtures in our experience. Many of us have used the standard Gripple in the past and it can be tough to try and adjust the fixture height using their pin. Not only can it be slow, but you risk losing it or dropping it from up on the lift, further slowing down the installation of lighting fixtures. This kit solves that problem with a quick release adjustable Kwik Lock device that requires no pin, and allows you to easily slide the cable up and down just by pressing a button with your thumb already on the locking device. The paddles at the end of the Y assembly fit into each hole at the corner of your high or low bay lighting fixture. With this loop kit you can attach the loop at the top of the ceiling or mounting location.
- High Bay Suspension Kit with 1/16 in. galvanized cables with #1 stop to loop over structure using the #112 loop adapter or insert through 1/4 in. hole in metal decking using PD-1/16 paddle end with cable stop
- The cut end of cable captures the loop in the Y paddle assembly using the KL-100 Kwik Lock Device. The adjustablility would be directly overtop the fixture end.
- 75 Lbs per Hanger-150 Lbs Total w/2-Cables
- Kit contains 2 parts of each item for total fixture mounting
If you need a custom cable length please give us a call or contact us here!